Sludgenutz
New member
https://forum.seymourduncan.com/showthread.php?t=57714&highlight=low+feedback
Per the thread above to those interested, I found the problem to be weak height adjuster springs that came stock with my Gibson Tony Iommi aftermarket pickup.
Apparently, the Iommi pickup was packed with a set of "short springs"! Uhhh...meaning that the springs were barely an inch long, and only had one finished end. They looked like one long spring cut in half...one finished end, and one barbed.
Anyhow, I got my other Iommi a week ago, and it was furnished with two long springs with finished ends! I cured the feedback issue with the the stock conical heavy-gauge Epi springs. If more low frequency problems arise, I may get a sample of "temperpedic bed foam", but for now all is good.:dance:
Per the thread above to those interested, I found the problem to be weak height adjuster springs that came stock with my Gibson Tony Iommi aftermarket pickup.
Apparently, the Iommi pickup was packed with a set of "short springs"! Uhhh...meaning that the springs were barely an inch long, and only had one finished end. They looked like one long spring cut in half...one finished end, and one barbed.
Anyhow, I got my other Iommi a week ago, and it was furnished with two long springs with finished ends! I cured the feedback issue with the the stock conical heavy-gauge Epi springs. If more low frequency problems arise, I may get a sample of "temperpedic bed foam", but for now all is good.:dance: