If your goal in using a boost pedal is to get more volume you are going to be very disappointed. Yes, the amp will get louder, but that is not the function of a boost pedal. The boost pedal is used to boost your line output from the guitar and hit your preamp harder. With this, you will see more gain, and there will be some colorization of the tone and shift in, eq. This is a very desirable effect for a lot of guitar players including myself. However, if you are just looking for an increase in volume get a bigger amp. To answer your question about using a boost with a lower wattage amp. The right boost will make them sing and give you dynamics you never thought were possible playing the guitar.
I never play (live/studio) without a boost inline sometimes I have two.
I use the Pickup Booster pedal for a slight volume boost. I use it into a clean tube amp (6v6s) that isn't up loud enough to distort, and it adds volume and some compression, but I'd still have to hit the guitar really hard to get it to distort.
Fun fact: Tom Morello uses an old DOD EQ pedal (FX 40B) to push 24db IIRC into his Marshall.
not on the records though
Are you running passives or actives into this unit?
I doubt anybody would let him. I corrected, it’s “only” 18db.
Passives, like the Alnico II Pro, Custom 5, Custom Custom, Jazz, 59, and 59/Custom Hybrid.
haha. I was in studio sessions in mid 90s with them -pretty familiar with the setups.
So you are basically using an ultra transparent buffer and boost -almost like a light active pickup preamp outside your guitar?
Almost like a pickup.... booster.
Fun fact: Tom Morello uses an old DOD EQ pedal (FX 40B) to push 18db into his Marshall.
So you are basically using an ultra transparent buffer and boost -almost like a light active pickup preamp outside your guitar?