7th Hell
New member
Hey-
Here's one for all the tech guys out there. I was jamming today on my Schecter Omen 7, and something very strange happened. What started as a little crackle whenever I selected the bridge SH-5 pup developed into a full-blown staticy buzz with very little/no signal. The neck SD '59 is unaffected, and sounds normal with no buzz or static when I put the 3-way switch to the neck pup position.
I checked the solder connections and ground wires- good
I checked the input jack connection- good
I inspected the 3-way toggle switch and noticed nothing unusual.
I do notice that whenever I tap the SH-5 bridge pup, the signal intermitantly cuts in and out. I want to say it feels like there's a loose wire/connection within the pup. Anyone ever had this happen to them before? I'm considering removing it and sending it in for warranty service. Your expert advice is GREATLY appreciated! Thanks.
Here's one for all the tech guys out there. I was jamming today on my Schecter Omen 7, and something very strange happened. What started as a little crackle whenever I selected the bridge SH-5 pup developed into a full-blown staticy buzz with very little/no signal. The neck SD '59 is unaffected, and sounds normal with no buzz or static when I put the 3-way switch to the neck pup position.
I checked the solder connections and ground wires- good
I checked the input jack connection- good
I inspected the 3-way toggle switch and noticed nothing unusual.
I do notice that whenever I tap the SH-5 bridge pup, the signal intermitantly cuts in and out. I want to say it feels like there's a loose wire/connection within the pup. Anyone ever had this happen to them before? I'm considering removing it and sending it in for warranty service. Your expert advice is GREATLY appreciated! Thanks.
Last edited: