Does anyone else have a few loaded Strat pick guards on the shelf?
- Thread starter solspirit
- Start date
JB_From_Hell
Jomo's Nimions
Just the one with the duncan designed singles that came out of my Strat with the Fishmans.
beaubrummels
Well-known member
My loaded guards are all in guitars right now. ;-)
oh i do. one with a strabro90 neck, antiquity ii surfer middle, antiquity ii firebird pup bridge. another with seth neck, antiquity texas hot bridge in the middle, and custom custom bridge. another with lil 59 neck and custom bridge. another with a full red devil set. another with a cool rails set. im sure there is at least one more im forgetting
edit: yep ssl6 neck, lil 59 bridge in the middle, patb3 and one with a set of a2 single coils i wound. 8k turns neck, 9k turns middle, 10k turns bridge.
edit: yep ssl6 neck, lil 59 bridge in the middle, patb3 and one with a set of a2 single coils i wound. 8k turns neck, 9k turns middle, 10k turns bridge.
beaubrummels
Well-known member
So, instead of swapping guitars, you swap pickguards during the gig?
doesnt everyone?!?
nah, i just have cool stuff wired up but (somehow) not enough strats. like the red devil set is wired up with a push/push tone control to split the neck and middle pups and an on/on/on switch for the bridge to get series/split/parallel. i dont wanna have to redo that, so i kept it wired up and got a new guard to try whatever the next thing i wanted to try was.
nah, i just have cool stuff wired up but (somehow) not enough strats. like the red devil set is wired up with a push/push tone control to split the neck and middle pups and an on/on/on switch for the bridge to get series/split/parallel. i dont wanna have to redo that, so i kept it wired up and got a new guard to try whatever the next thing i wanted to try was.
Chris Pile
Well-known member
W/B/W loaded with Lace Sensors - H/S/S.
playas
Well-known member
I've a HS with a reverse angled neck single for my Hohner as an alternative to the HSS...but I probably won't bother much with it to be honest.
...unless I maybe route it for HSS and use it in another build.
The plan was a lower output HSS set and an easy swap to a heavier sounding HS...but the HS set-up wasn't doing it for me.
...unless I maybe route it for HSS and use it in another build.
The plan was a lower output HSS set and an easy swap to a heavier sounding HS...but the HS set-up wasn't doing it for me.
Rex_Rocker
Well-known member
I don't, but I have a Tele pickguard that I loaded a Quarter Pound Neck in, then realized until I took the other one out that my Esquire is not routed for a neck pickup. I would've thought they'd just slap a no-hole pickguard on a regular Tele body to save some money. Looks like they don't. 
solspirit
Ultimate Post Liker
I don't, but I have a Tele pickguard that I loaded a Quarter Pound Neck in, then realized until I took the other one out that my Esquire is not routed for a neck pickup. I would've thought they'd just slap a no-hole pickguard on a regular Tele body to save some money. Looks like they don't.
Nope, they never did it's got to be routed and it's easy to put a swimming pool in
Rex_Rocker
Well-known member
I honestly should. Good way to shed some weight off my heaviest guitar.
JB_From_Hell
Jomo's Nimions
FYI, I just swimming pool'd two MIM Strats and an MIA Tele. All three lost 3oz.
Similar threads
