F/S: Project stuff I don't need

[Toner]

Early 90s Fender Squier body and neck. The body was flat blacked, then I started to sand it down with some 600 grit to spray it something else, never finished it, comes with original bridge, jack plate, and black back trem cover. The neck headstock was sprayed flat black to match the body as well. The neck has a clear gloss on it and the headstock front is flat black. What you see is what you get, I don't have any other parts. No neck pocket cracks, no major damage or dents/chips or anything. $50 shipped?

I also have a Mighty Mite maple strat neck. I bought it off a forum member here a while ago, never got around to it. The previous owner had tung oiled the neck (poorly) and mounted the neck and one of the neck screws started to come through the top, but once the neck is cleared, or even if it's left raw, you would never feel it when playing and it wouldn't affect the sound at all of the guitar. The mounting holes were plugged with dowel rod and titebond wood glue for a fresh start. These are $100 new, this needs a $5 bottle of acetone and some elbow grease to remove the tung oil. $50 shipped? PENDING PAYMENT.

All the pics you would need for both of these items can be found here: http://s43.photobucket.com/albums/e386/havrelm1/for sale pics/

Continental US only.

 

[gnoj_LL]

Re: F/S: Project stuff I don't need

would the maple neck fit a 91 MIJ squier strat. mine has originaly 21 frets, or would that just mess up the intonation. and would not fit too.

oh yeah, what do you mean poorly put tung oil, is it sticky?

 

[Artie]

Re: F/S: Project stuff I don't need

Its hard to tell from the pics, but is the Strat a hardtail?

 

[Toner]

Re: F/S: Project stuff I don't need

The tung oil is just not smooth, probably the first time the guy ever tried to do it, it comes off easily with acetone, I started to remove it.

Standard fender trem setup on the body.

 

[theodie]

Re: F/S: Project stuff I don't need

What are you looking for in trade for the mighty mite?

 

[gnoj_LL]

Re: F/S: Project stuff I don't need

pm sent

 

[Toner]

Re: F/S: Project stuff I don't need

Mighty Mite Neck on hold to gnoj_LL pending payment.

 

[Toner]

Re: F/S: Project stuff I don't need

would the maple neck fit a 91 MIJ squier strat. mine has originaly 21 frets, or would that just mess up the intonation. and would not fit too.

oh yeah, what do you mean poorly put tung oil, is it sticky?

the 22nd fret is an overlaping extension, so the scale will still be 25.5, and there is room between the neck pickup and where the original 21 fret neck ends.

It will work.


And if anone wants to check my selling profile, on ebay it's team_darkstar.