ItsaBass
New member
Prices include shipping.
Fender Strat parts:
1. Set of three Fender 57/62's. Probably about 10 years old. Leads have been trimmed in the past and then extended using cloth-wrapped wire. Joints are neatly wrapped in heat-shrink tubing. Also, the leads from each pickup are grouped together with fatter pieces of heat shrink tubing, so the pickups go into the body very easily and cleanly. Mags have some rust spots and the lacquer on the mags has been worn off. They work great and sound great. Asking $100 with beveled mounting screws, springs, and cream covers with matching knobs.
2. Substitute cream Custom Shop covers and knobs for an extra $10, or purchase them outright for $20. The CS covers and knobs are an ever-so-slightly less opaque and slightly harder material.
3. I can include three used Fender pots (CTS 250K-Ohm) with the shaft through the back for an extra $10. One of them has tons of solder on the back, but still works fine.
4. I can include a genuine Fender 11-hole gold anodized aluminum pickguard for an extra $30. (You will need screws with flat-bottomed heads to mount the pickups and switch on this guard.)
5. Buy all of that stuff together (guard, pots, pickups) for $125 with the normal covers and $130 with the CS covers.
6. One set of cream covers and matching knobs, from MIJ '50's Strat. $12 shipped via padded envelope.
Other parts:
1. Heavily wax potted mystery pickup. Strat-style with staggered, non-beveled poles. Might have come out of an Ibanez RG of some sort that I parted out years ago, but I really have no idea. It's in very good condition, almost like new. Measures 5.95 K-Ohm. Asking $17 shipped via padded envelope.
2. Three Sovtek 12AX7WA tubes, like new, but no boxes. Will ship in EXH, Tungsol, and JJ boxes. $16 shipped, or add to the Strat parts for $10.
PM me with inquiries, offers, trades, insults, etc.
Fender Strat parts:
1. Set of three Fender 57/62's. Probably about 10 years old. Leads have been trimmed in the past and then extended using cloth-wrapped wire. Joints are neatly wrapped in heat-shrink tubing. Also, the leads from each pickup are grouped together with fatter pieces of heat shrink tubing, so the pickups go into the body very easily and cleanly. Mags have some rust spots and the lacquer on the mags has been worn off. They work great and sound great. Asking $100 with beveled mounting screws, springs, and cream covers with matching knobs.
2. Substitute cream Custom Shop covers and knobs for an extra $10, or purchase them outright for $20. The CS covers and knobs are an ever-so-slightly less opaque and slightly harder material.
3. I can include three used Fender pots (CTS 250K-Ohm) with the shaft through the back for an extra $10. One of them has tons of solder on the back, but still works fine.
4. I can include a genuine Fender 11-hole gold anodized aluminum pickguard for an extra $30. (You will need screws with flat-bottomed heads to mount the pickups and switch on this guard.)
5. Buy all of that stuff together (guard, pots, pickups) for $125 with the normal covers and $130 with the CS covers.
6. One set of cream covers and matching knobs, from MIJ '50's Strat. $12 shipped via padded envelope.
Other parts:
1. Heavily wax potted mystery pickup. Strat-style with staggered, non-beveled poles. Might have come out of an Ibanez RG of some sort that I parted out years ago, but I really have no idea. It's in very good condition, almost like new. Measures 5.95 K-Ohm. Asking $17 shipped via padded envelope.
2. Three Sovtek 12AX7WA tubes, like new, but no boxes. Will ship in EXH, Tungsol, and JJ boxes. $16 shipped, or add to the Strat parts for $10.
PM me with inquiries, offers, trades, insults, etc.
Last edited: