Fender Fat 50s and Duncan SSL5 do they wire up the same?
- Thread starter OlinMusic
- Start date
STRATDELUXER97
Stratoblaster Tone Meister
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
Which specific Fat 50 are you looking to replace with the Duncans? One of my guitars has a Fralin SP43 in the bridge and then Fat 50s in the middle and neck positions...I can check the 3 pickups as far as N or S magnet polarity for ya,but not sure if that will help?
I think you're concerned with how the pickups are electrically wound...
Not sure specifically about the wire codes/colors?
Which specific Fat 50 are you looking to replace with the Duncans? One of my guitars has a Fralin SP43 in the bridge and then Fat 50s in the middle and neck positions...I can check the 3 pickups as far as N or S magnet polarity for ya,but not sure if that will help?
I think you're concerned with how the pickups are electrically wound...
Not sure specifically about the wire codes/colors?
STRATDELUXER97
Stratoblaster Tone Meister
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
You might want to call the techs at Duncan and see if they can help?
You might want to call the techs at Duncan and see if they can help?
STRATDELUXER97
Stratoblaster Tone Meister
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
You might want to call the techs at Duncan and see if they can help?
You might want to call the techs at Duncan and see if they can help?
STRATDELUXER97
Stratoblaster Tone Meister
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
Lord knows I've had to call over there a time or two or three! :biglaugh: Scott Miller has helped me out quite a bit and is a great guy!
Lord knows I've had to call over there a time or two or three! :biglaugh: Scott Miller has helped me out quite a bit and is a great guy!
Last edited:
kmcguitars
GuitarArtologist
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
Here is your answer from the SD Q&A. Upon reading this my theory on why my Fender 62'RI (neck) would not behave w/t my APS-1 (Mid) is reinforced.
http://www.seymourduncan.com/support/faq/frequently-asked/installation-an/are_seymour_dun/
Here is your answer from the SD Q&A. Upon reading this my theory on why my Fender 62'RI (neck) would not behave w/t my APS-1 (Mid) is reinforced.
http://www.seymourduncan.com/support/faq/frequently-asked/installation-an/are_seymour_dun/
Gearjoneser
Gear Ho
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
If you run into a problem, flip flop 2 of one brand, wired normally, and wire the off brand with leads reversed.
If you run into a problem, flip flop 2 of one brand, wired normally, and wire the off brand with leads reversed.
kmcguitars
GuitarArtologist
Re: Fender Fat 50s and Duncan SSL5 do they wire up the same?
Yeah, But if you have a H-S-S setup and the 2 singles are magnetically out of phase, You can flip all the wires you want... It ain't gonna happen.:1:
Yeah, But if you have a H-S-S setup and the 2 singles are magnetically out of phase, You can flip all the wires you want... It ain't gonna happen.:1:
Similar threads
