sooperunkn
New member
Well I finally got off my a$$ and took pictures... and plenty of them!!
First the guitars....
My number one... 1978 Les Paul Custom (loaded w/ C5 bridge, Jazz neck)
closer look showing TP6 fine tuners and mini toggles for coil taps....
and headstock w/ bone nut....
For funkier stuff... my 1996 MIJ Jazzmaster (loaded w/ Antiquity 2s)
and a closer look at the added buzz stop, graphtech saddles, and the chrome flatwound strings....
And my lovely 2003 Taylor 414RCE (Rosewood Limited Edition)...
Here's my 3-channel Dual Rectifier sitting on top of a Marshall 1960A cab with the Hot Plate in between....
Here's my pedalboard: the DD6 and RC20 Loop Station are in the effects loop, and the my pre-amp signal starts at the Fulltone Clyde Deluxe->Fulltone DejaVibe (1996)->Maxon Rotary Phaser->Korg Tuner->BBE Sonic Stomp. The board is covered in velcro. Underneath the shelf is the guts of a Furman SPB8 pedalboard/power conditioner.
Here's a shot of my PA consisting of a Yamaha P2250C stereo power amp, Behringer UB1204FX mixer, and a Furman RP-8 power conditioner...
And finally a shot of my basement studio. The PA is piped through the computer where I record my stuff using Cakewalk. My current soundcard only has 1 input but I'm looking for a new rackmounted one which will allow me to record up to 8 separate tracks at once....
Hope ya like!
-Jay
First the guitars....
My number one... 1978 Les Paul Custom (loaded w/ C5 bridge, Jazz neck)
closer look showing TP6 fine tuners and mini toggles for coil taps....
and headstock w/ bone nut....
For funkier stuff... my 1996 MIJ Jazzmaster (loaded w/ Antiquity 2s)
and a closer look at the added buzz stop, graphtech saddles, and the chrome flatwound strings....
And my lovely 2003 Taylor 414RCE (Rosewood Limited Edition)...
Here's my 3-channel Dual Rectifier sitting on top of a Marshall 1960A cab with the Hot Plate in between....
Here's my pedalboard: the DD6 and RC20 Loop Station are in the effects loop, and the my pre-amp signal starts at the Fulltone Clyde Deluxe->Fulltone DejaVibe (1996)->Maxon Rotary Phaser->Korg Tuner->BBE Sonic Stomp. The board is covered in velcro. Underneath the shelf is the guts of a Furman SPB8 pedalboard/power conditioner.
Here's a shot of my PA consisting of a Yamaha P2250C stereo power amp, Behringer UB1204FX mixer, and a Furman RP-8 power conditioner...
And finally a shot of my basement studio. The PA is piped through the computer where I record my stuff using Cakewalk. My current soundcard only has 1 input but I'm looking for a new rackmounted one which will allow me to record up to 8 separate tracks at once....
Hope ya like!
-Jay
Last edited:
