RickD
New member
So first a shout out to all you guys who helped me troubleshoot my electronics issue -its been sorted out THANKS!
So here she is, this is a 2019 (purchased new in Oct 2020) Fender American Professional FSR Stratocaster in Lake Placid Blue
Series: Limited Edition
Body Material: Alder
Body Finish: Gloss Urethane
Neck: Maple, Compound Back Shape, Modern “C” to “D”
Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Fingerboard: Striped Ebony, 9.5” to 14” Compound Radius (241 mm-355.6 mm)
Frets: 22, Narrow Tall
Position Inlays: White Dot
Nut (Material/Width): Bone, 1.685” (42.8 mm)
Tuning Machines: Fender® Standard Cast/Sealed Staggered
Scale Length: 25.5” (648 mm)
Bridge: 2-Point Synchronized Tremolo with Bent Steel Saddles and Pop-In Tremolo Arm
Pickguard: 3-Ply Black/White/Black
Pickups: V-Mod Single-Coil Strat® (Bridge), V-Mod Single-Coil Strat® (Middle), V-Mod Single-Coil Strat® (Neck)
Pickup Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Controls: Master Volume with Treble-Bleed, Tone 1. (Neck Pickup), Tone 2. (Bridge and Middle Pickups)
Control Knobs: Black Plastic
Hardware Finish: Nickel/Chrome
Case: Elite Molded Case
I installed a Seymour Duncan TB-4 Trembucker, Seymour Duncan STK-S4 and Seymour Duncan STK-S7 w/push pull tone knob that activates the neck pickup (Gilmore mod) and push pull tone knob that splits the JB -this is a phenomenal setup!!
So here she is, this is a 2019 (purchased new in Oct 2020) Fender American Professional FSR Stratocaster in Lake Placid Blue
Series: Limited Edition
Body Material: Alder
Body Finish: Gloss Urethane
Neck: Maple, Compound Back Shape, Modern “C” to “D”
Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Fingerboard: Striped Ebony, 9.5” to 14” Compound Radius (241 mm-355.6 mm)
Frets: 22, Narrow Tall
Position Inlays: White Dot
Nut (Material/Width): Bone, 1.685” (42.8 mm)
Tuning Machines: Fender® Standard Cast/Sealed Staggered
Scale Length: 25.5” (648 mm)
Bridge: 2-Point Synchronized Tremolo with Bent Steel Saddles and Pop-In Tremolo Arm
Pickguard: 3-Ply Black/White/Black
Pickups: V-Mod Single-Coil Strat® (Bridge), V-Mod Single-Coil Strat® (Middle), V-Mod Single-Coil Strat® (Neck)
Pickup Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Controls: Master Volume with Treble-Bleed, Tone 1. (Neck Pickup), Tone 2. (Bridge and Middle Pickups)
Control Knobs: Black Plastic
Hardware Finish: Nickel/Chrome
Case: Elite Molded Case
I installed a Seymour Duncan TB-4 Trembucker, Seymour Duncan STK-S4 and Seymour Duncan STK-S7 w/push pull tone knob that activates the neck pickup (Gilmore mod) and push pull tone knob that splits the JB -this is a phenomenal setup!!
