Dutch birch top
Dutch chestnut back
Dutch maple/sycamore neck (fat, roundback: can be shaped as you wish!)
Dutch walnut fretboard (24.75' inch scale, 22 frets, 10-14 inch radius)
Seymour Duncan Antiquity pickups
Gotoh hardware
Bone nut
yes, but not three pup lps unfortunately. although i guess i could put a dummy pup in the middle and sink it super low on the second one. the 5 way lever switch on the first isnt my thing since i flip all the time
yes, but not three pup lps unfortunately. although i guess i could put a dummy pup in the middle and sink it super low on the second one. the 5 way lever switch on the first isnt my thing since i flip all the time
Oh, but that switch can be altered easily. I can make a custom switch plate, install a 3 way toggle on that plate and then you get to choose later on in life if you wanna go with a 5 way blade, 3 way blade or 3 way toggle. I can give you 2 volume, 2 tone, with a push pull for split and a push pull to engage the middle pickup.
I have 1mm tall metal pickup rings in stock as well: that might make the neck and bridge pickup stick out a bit higher above the ring than usual, but the middle pickup can go all the way down low.
I mean... for 500E all in, I think that's a bargain?