Northwinds
New member
Deb has been complaining about the "mess" in the livingroom lately and is telling me that something has to go. I really dig how the cab sounds so I will be keeping that and using it with my 6505
If this does not go, I will not be in the least disappointed but at least I made an effort for her
WHY? I would rather ship a head then a 100lb combo
Specs:
A 100-watt tube head with a metallic grill front face. Each channel has its own 3-band equalizer as well as volume, gain and presence controls. The Clean channel has a Bright switch; the Crunch and Lead channel each have a Notch switch (cuts mids). It also sports two switchable Master volumes, a Deep control (dials in lowend and this will shake your heart, not meant for use with cheap cabs), a parallel effects loop, an integrated MIDI interface and 4, 8 and 16 ohms speaker output impedance
100 watts alltube amp
Valves: 5x ECC 83/12AX7 and 4x EL34
3 channels (Clean, Crunch and Lead)
Gain, Bass, Middle, Treble and Presence controls for each channel
Notch switches for Crunch and Lead
Parallel effects loop
Effect Mix control
Deep control to set the amount of low end in the power amp stage
Master 1 and 2, switchable
Integrated MIDI interface
4, 8 and 16 ohms speaker output impedance, switchable
Metallic grill front face
Weight: 21 kg/46.2970751 lbs
Dimensions (W/H/D): 0,72 x 0,28 x 0,26 m
Made in Germany
Looking for a JVM or other high gain heads. Older Les Pauls (no Studio's, Classic's or P-90 models), just Standard's or Custom's
Might consider other stuff as long as it's not import guitars or cheap Chinese made amps. LMK what you might have
I AM NOT INTERESTED IN ANY DEAL THAT REQUIRES CASH ON MY PART
Cash offers work also, these heads (not including the $1200 cab) are just under $4k new. There was one at a GC in California for $2700 used, you can get this one for far more reasonable
PM me if your interested
If this does not go, I will not be in the least disappointed but at least I made an effort for her
WHY? I would rather ship a head then a 100lb combo
Specs:
A 100-watt tube head with a metallic grill front face. Each channel has its own 3-band equalizer as well as volume, gain and presence controls. The Clean channel has a Bright switch; the Crunch and Lead channel each have a Notch switch (cuts mids). It also sports two switchable Master volumes, a Deep control (dials in lowend and this will shake your heart, not meant for use with cheap cabs), a parallel effects loop, an integrated MIDI interface and 4, 8 and 16 ohms speaker output impedance
100 watts alltube amp
Valves: 5x ECC 83/12AX7 and 4x EL34
3 channels (Clean, Crunch and Lead)
Gain, Bass, Middle, Treble and Presence controls for each channel
Notch switches for Crunch and Lead
Parallel effects loop
Effect Mix control
Deep control to set the amount of low end in the power amp stage
Master 1 and 2, switchable
Integrated MIDI interface
4, 8 and 16 ohms speaker output impedance, switchable
Metallic grill front face
Weight: 21 kg/46.2970751 lbs
Dimensions (W/H/D): 0,72 x 0,28 x 0,26 m
Made in Germany
Looking for a JVM or other high gain heads. Older Les Pauls (no Studio's, Classic's or P-90 models), just Standard's or Custom's
Might consider other stuff as long as it's not import guitars or cheap Chinese made amps. LMK what you might have
I AM NOT INTERESTED IN ANY DEAL THAT REQUIRES CASH ON MY PART
Cash offers work also, these heads (not including the $1200 cab) are just under $4k new. There was one at a GC in California for $2700 used, you can get this one for far more reasonable
PM me if your interested
Last edited: