darthphineas
New member
NOTE: all items are to be considered pre-owned. that means they are not new and as such, they will and probably do have signs of wear.
SOLD OUT - EVH D-Tuna, chrome
http://www.dtuna.com
one D-Tuna logo - SOLD
one EVH logo - SOLD
both come with:
1 - EVH D-Tuna Unit
2 - String lock screws
1 - Spring
1 - Fine tuning Allen wrench
1 - instruction manual
one has the D-Tuna, one has the EVH logo. these are going for $51.50 new, and commonly over $35.00 on eBay. here is the fine print: the one with the EVH logo has a burr inside right at the mouth of the opening that keeps the unit from coming down to rest all the way on the string lock screw. I checked on this and it is not all that uncommon and can be resolved with a little bit of ye old Dremel. I have 3 of these units, only used 2, so there was never a need to tweak it. the way it works, removing the burr will not affect anything but allowing it to work properly. so you save $5 for being handy with a Dremel.
SOLD OUT - Tremol-No™ Pin-type w/ Deep-C™
http://www.tremol-no.com/products.asp
http://www.allparts.com/BP-2005-010-Tremol-No-Pin-Type_p_1033.html
$40.00 shipped, each
each comes with:
1 - Tremol-No pin-type unit
2 - Fine tuning Allen wrench
1 - sprare finger screw
3 - spare set screws
1 - 1mm spacer
1 - 2mm spacer
bonus items:
1 - additional spare set screw
1 - ground wire crimp lug
and... whoever buys one of the Tremolo-No units first, I will also include at no extra cost:
(update: this went with the first one that was sold and is no longer available)
1 - extra spare set screw
1 - extra 1mm spacer
1 - extra 2mm spacer
1 - extra spare finger screw
and...
1 - extra pin!
these are currently going for $75 new on AllParts (commonly $45-55 on eBay), and that is without the additional spare set screw or ground wire crimp lug. if you are not familiar with how it works, please check the links. it worked fine for me, and even in total free-floating mode it added additional mass which helped sustain. when blocked or toally locked down, the sustain was even greater.
more fine print: all prices are via PayPal gift option for items shipped within ConUS. a tracking # will be provided once shipped. once again, all items are pre-owned and should not be considered new. outside of the one D-Tuna, I have used these items and they worked just fine for me. any instructions/details/videos/etc. are all available at the links provided. if there are multiple interests, I will go by the time the PM is received. any HOLD status will be good for 24 hours while awaiting payment, unless you contact me with a heads-up. if you buy multiple items, I will knock $5 off each addition item.
TRADES: contact me via PM to discuss.
SOLD OUT - EVH D-Tuna, chrome
http://www.dtuna.com
one D-Tuna logo - SOLD
one EVH logo - SOLD
both come with:
1 - EVH D-Tuna Unit
2 - String lock screws
1 - Spring
1 - Fine tuning Allen wrench
1 - instruction manual
one has the D-Tuna, one has the EVH logo. these are going for $51.50 new, and commonly over $35.00 on eBay. here is the fine print: the one with the EVH logo has a burr inside right at the mouth of the opening that keeps the unit from coming down to rest all the way on the string lock screw. I checked on this and it is not all that uncommon and can be resolved with a little bit of ye old Dremel. I have 3 of these units, only used 2, so there was never a need to tweak it. the way it works, removing the burr will not affect anything but allowing it to work properly. so you save $5 for being handy with a Dremel.
SOLD OUT - Tremol-No™ Pin-type w/ Deep-C™
http://www.tremol-no.com/products.asp
http://www.allparts.com/BP-2005-010-Tremol-No-Pin-Type_p_1033.html
$40.00 shipped, each
each comes with:
1 - Tremol-No pin-type unit
2 - Fine tuning Allen wrench
1 - sprare finger screw
3 - spare set screws
1 - 1mm spacer
1 - 2mm spacer
bonus items:
1 - additional spare set screw
1 - ground wire crimp lug
and... whoever buys one of the Tremolo-No units first, I will also include at no extra cost:
(update: this went with the first one that was sold and is no longer available)
1 - extra spare set screw
1 - extra 1mm spacer
1 - extra 2mm spacer
1 - extra spare finger screw
and...
1 - extra pin!
these are currently going for $75 new on AllParts (commonly $45-55 on eBay), and that is without the additional spare set screw or ground wire crimp lug. if you are not familiar with how it works, please check the links. it worked fine for me, and even in total free-floating mode it added additional mass which helped sustain. when blocked or toally locked down, the sustain was even greater.
more fine print: all prices are via PayPal gift option for items shipped within ConUS. a tracking # will be provided once shipped. once again, all items are pre-owned and should not be considered new. outside of the one D-Tuna, I have used these items and they worked just fine for me. any instructions/details/videos/etc. are all available at the links provided. if there are multiple interests, I will go by the time the PM is received. any HOLD status will be good for 24 hours while awaiting payment, unless you contact me with a heads-up. if you buy multiple items, I will knock $5 off each addition item.
TRADES: contact me via PM to discuss.
Last edited:
