Agileguy_101
Master of his Domain
Up for grabs is my Warmoth HSH pickguard, fully loaded with a Screamin' Demon in the neck, SSL-5/2 in the middle, and 59/Custom Hybrid in the bridge. The wiring scheme is my own design - with the smaller toggle in the down position, the 3 way acts as like a LP toggle - bridge, bridge+neck, and neck. With the smaller toggle up, both humbuckers are split to the inner coils and the middle pickup is added to all positions. The middle pickup is RW/RP for hum cancelling, but it doesn't cancel hum in the neck+middle position because I used a bridge humbucker. If you want to redo it for hum cancelling, you just need to switch the coil splitting on the Demon so that it splits to the outer coil.
Other details: Duncan YJM speed volume pot, treble bleed mod, Sprague .022 cap, switchcraft (IIRC) toggle. The red wire on the volume pot needs to be re-grounded to the back of the pot, other than that it should work like a treat. Just connect the grounds from your jack and claw to the back of the volume and the tip from the jack to the output of the pot.
For this assembly I am asking for $150 OBO + shipping and paypal CONUS. I will ship via USPS priority with insurance and delivery confirmation. Shipping and Paypal should be about $15. If you want me to ship internationally, contact me and I'll get you a price ASAP.
As far as trades go, I'm primarily looking for a nice volume pedal (Dunlop would be killer), a Voodoo Labs power supply (ISO 5 or Digital) a NYC pedalboards Big Shot Deluxe, or a nice 6 screw strat bridge (Callaham, Gotoh, Wilkinson/Gotoh, etc). I'm open to any offers, especially cool fuzz pedals (no big muffs or fuzz faces though)
Last edited:
