FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

  • Thread starter Thread starter MartinSixStringCustoms
  • Start date Start date
M

MartinSixStringCustoms

Guest
I've got a bunch of overstock items I'm blowing out. Everything is brand new.

(3) Graph Tech FerraGlide Tele Saddle Packs PG-8100-N0 - $33.00/each

Worldwide shipping is $5.00 regardless of quantity ordered. I prefer PayPal, but USA bros can send me a US Postal Service Money Order.

Thanks!
 
Last edited:
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

Bump
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

CTS Premium 250K Split Shaft Audio Pots +- 10% Tolerance - $6.00/each

Matt: Do CTS make any small diameter pots? ( 250K or 500K)....the standard diameter is a pain to replace in 335's.

Thanks

Dave
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

greco said:
CTS Premium 250K Split Shaft Audio Pots +- 10% Tolerance - $6.00/each

Matt: Do CTS make any small diameter pots? ( 250K or 500K)....the standard diameter is a pain to replace in 335's.

Thanks

Dave
Click to expand...

Not sure, Dave. I'm guessing not, but can't say for sure. Most of the smaller diameter pots I've seen have been metric.
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

Bada Bing! said:
Not sure, Dave. I'm guessing not, but can't say for sure. Most of the smaller diameter pots I've seen have been metric.
Click to expand...

Anything in a small diameter that comes close to CTS quaility?

Do metric pots have a larger or smaller split shaft diameter?
(i.e., Do standard knobs fit on them?)

Thanks Matt.
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

greco said:
Anything in a small diameter that comes close to CTS quaility?

Do metric pots have a larger or smaller split shaft diameter?
(i.e., Do standard knobs fit on them?)

Thanks Matt.
Click to expand...

I honestly don't know, Dave. I never get anything metric in stock, as I specialize in US thread parts. If I'm not mistaken, standard knobs don't fit properly.

Sorry I'm not much of a help on this one. My brain being fried from work isn't helping either :smack:
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

Matt:
Thanks for responding.

Dave
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

No no no, you are supposed to be overstocked on Tonepros ABR-1's!

:D
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

PM me re: ABR1s guys. I can get them for you pretty reasonably.
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

Very silly question... The Tele saddles. Is that Per saddle or for the full set?
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

Email sent on Tone Pros studs.
 
Re: FS: Overstock Items (GraphTech, CTS, Switchcraft, TonePros, DiMarzio)

Bump
 
You must log in or register to reply here.
Back
Top