Archer250
New member
A custom built guitar made by Rangka Guitars, a boutique custom shop in Thailand.
This is a prototype for a new model I've been working with them on. Basically "strat, but sleeker, not pointier" in a way that looks even sleeker than their current offerings.
This is the only one of its kind for now.
This guitar is immaculate, currently there are two small dings on the neck and AFAIK none on the body. It is very light and very, very resonant (it's chambered), but sounds deceptively fat.
Asking 1.5k USD for this, plus shipping. I'll figure out the shipping later transparently while giving you options.
Due to disagreements between PayPal and the Thai government, I cannot receive money via PayPal, and can only use Skrill or SWIFT transfer.
I would much rather use SWIFT, and will gladly pay for the transaction fees.
Please Email me at Pran.250@gmail.com if interested. I am not always here on this forum to check PMs.
Specs are as follows:
Body: Chambered hard ash w/ 5mm maple top
Neck & Fingerboard: 2pc quartersawn maple
Neck profile: 57v to C (22-24mm)
Neck Radius: 12"
No. of Frets: 22
Fretwire: Jescar 58118 (Super Jumbo)
Fret material: Stainless steel
Nut width: 42mm (1.65 in)
Nut material: Bone
Pickups:
Bridge: Seymour Duncan Custom Custom TB11
Middle: C-Harmonic 60s Custom
Neck: C-Harmonic 60s Custom (Think of them as similar to Fat 60s)
Hardware and Electronics:
Gotoh locking tuners,
Gotoh 510 bridge w/ Gotoh plated brass saddles
CTS pots
Oak Grigsby superswitch
Soundclip: https://youtu.be/Ag6lbzLVgbE
Full pics here: https://imgur.com/a/Gnh4mDf
This is a prototype for a new model I've been working with them on. Basically "strat, but sleeker, not pointier" in a way that looks even sleeker than their current offerings.
This is the only one of its kind for now.
This guitar is immaculate, currently there are two small dings on the neck and AFAIK none on the body. It is very light and very, very resonant (it's chambered), but sounds deceptively fat.
Asking 1.5k USD for this, plus shipping. I'll figure out the shipping later transparently while giving you options.
Due to disagreements between PayPal and the Thai government, I cannot receive money via PayPal, and can only use Skrill or SWIFT transfer.
I would much rather use SWIFT, and will gladly pay for the transaction fees.
Please Email me at Pran.250@gmail.com if interested. I am not always here on this forum to check PMs.
Specs are as follows:
Body: Chambered hard ash w/ 5mm maple top
Neck & Fingerboard: 2pc quartersawn maple
Neck profile: 57v to C (22-24mm)
Neck Radius: 12"
No. of Frets: 22
Fretwire: Jescar 58118 (Super Jumbo)
Fret material: Stainless steel
Nut width: 42mm (1.65 in)
Nut material: Bone
Pickups:
Bridge: Seymour Duncan Custom Custom TB11
Middle: C-Harmonic 60s Custom
Neck: C-Harmonic 60s Custom (Think of them as similar to Fat 60s)
Hardware and Electronics:
Gotoh locking tuners,
Gotoh 510 bridge w/ Gotoh plated brass saddles
CTS pots
Oak Grigsby superswitch
Soundclip: https://youtu.be/Ag6lbzLVgbE
Full pics here: https://imgur.com/a/Gnh4mDf
