FS - Traynor 80watt; 4x10

sbecker67

New member
Bought this about 5 years ago with the intention of putting an inexpensive rig together that I could leave in the bands rehearsal space and stop lugging gear around. Before I could get everything together that I wanted, the band died and I haven't had any use for it since. Simple rule, if you don't use it in 5 years - get rid of it!

I don't have a firm price in my mind, but I think it's worth around $450.00. I live in Philadelphia and accept Paypal.

Some specs:
Two new tone-shaping controls give players unprecedented tonal variety for nearly any vintage tube tone. A 'Scoop' switch on the lead channel adds body for much heavier leads while the 'Expander' switch equalizes certain frequencies on the clean channel to create crystal clear new rhythm sounds – often simulating an acoustic-like tone from an electric guitar.
A parallel effects loop with separate input and output trim pots for better overall effects control and a series effects loop (or loop through) between the tube pre-amp and tube power stage give the performer more flexibility over the signal path than found on other amplifiers.
The Custom Valve 80Q is vintage Traynor with black vinyl covering and chrome-plated corners, all plywood construction, and a classic front-mounted Traynor logo. The rear mounted control panel is easy to access, yet recessed for protection.
Features
• All tube construction with 4 x 5881, 3 x 12AX7A tubes
• 4 x 10 Celestion™ Tube-10 speakers
• Separate tone controls for clean and drive channels
• ‘Scoop’ switch on lead channel for heavy ‘boutique amp’ lead sound
• ‘Expander’ switch on rhythm channel for unique variations of clean tone
• Parrallel effects loop with trim controls on input and output
• DC powered filament supply on preamp tubes for reduced hum
• Autobalancing bias supply means no need for matched pairs of output tubes or bias adjustments
• Long Accutronics reverb springs for authentic vintage sound
• Fully regulated power supply for ultra low noise
• Conservatively driven output for extended tube life
• Additional ‘loop-through’ serial effects loop
• 80 great big loud tube watts… not the little tiny solid state ones.
Specifications
Type Tube Guitar Amplifier
Cabinet Program Power (Watts) 80
Cabinet Impedance (Ohms) 8
Minimum Impedance (Ohms) 2
Speaker Configuration - LF (Size / Power) 4 x 10 inch Celestion Tube 10's
Inputs 2
Channel 1 - inputs 1/4 phone jack
Channel 1 - controls Gain, Volume,Treble, Mid, Bass
Channel 1 - switches Boost, Scoop
Channel 2 - inputs Shared w/ Channel 1
Channel 2 - controls Volume, Treble, Mid, Bass
Line Out (type / configuration) Speaker Compensated XLR Balanced Out
Effects Volume Yes
Effects Loop / Location Yes / Rear
Effects Footswitch / Function Yes / Channel select, Boost
LED Indicators Channel Select, Boost, Standby
External speaker output / location 1/4 inch rear
Headphone Jack yes
Other Features Standby Switch, Auto matching circuit, DC Filaments on preamp tubes, Perforated Steel Grille
Dimensions (DWH, inches) 9.5 x 26.5 x 25
Dimensions (DWH, cm) 24 x 67 x 65
Weight (lbs / kg) 67 / 30.4



Muscians Friend - http://guitars.musiciansfriend.com/...-Combo-Amp-with-Celestion-Speakers?sku=480961

Harmony Central - http://reviews.harmony-central.com/reviews/Guitar+Amp/product/Traynor/YCV80Q+410+Combo/10/1
 
Re: FS - Traynor 80watt; 4x10

I bet that thing can kill small rodents.
With its clean tone.
Sounds like a great price, if you need that much amp.
I dont.
 
Back
Top