Fullsized Scremon Demon w/STD Bobbin Screws

[STRATDELUXER97]

I finally got around to replacing the row of allen screws on my fullsized Scremon Demon I have in one of my strats..

I Liked the outcome...Is it me,or did the screws make the pickup a bit ballsier overall? It's a slight change,but one I do notice..

Thanks to 3 Cent Hero and Stratandaks for sending me the screws...I like the way the pickup sounds and so I'm leaving the standard bobbin screws in place...

John

 

[Fusion1]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

I tried all slotted screws in my Demon only I installed it in the neck of my Peavey T-60. It's got balls for sure, especially in the neck. I never bothered to try it in stock form. I will probably try it stock next and then finally all hex.

 

[big_black]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

To my ears, that is the way the Demon SHOULD sound.

 

[mrid]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

Do you have an A5 or an A2 magnet in there? I've got a Demon and a Custom that I'm trying to decide between for my LP.

 

[Brow]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

I'm planning on changing out the Demon that I have in my Gordon Smith as it's not really 'doing it' for me in this guitar. Where can I get some screws from so that I can try the Demon with all slotted screws before I finally decide if I want to replace it with something else?

Sorry to hijack the thread

Craig

 

[Fusion1]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

Brow you can swap 6 screws from an old pickup you may have lying around. If you need to purchase just the screws you might find them at stewmac.com or AMPGE ( if he is still selling parts).

 

[STRATDELUXER97]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

Do you have an A5 or an A2 magnet in there? I've got a Demon and a Custom that I'm trying to decide between for my LP.

I have the stock A5 in mine...

 

[Brow]

Re: Fullsized Scremon Demon w/STD Bobbin Screws

Brow you can swap 6 screws from an old pickup you may have lying around. If you need to purchase just the screws you might find them at stewmac.com or AMPGE ( if he is still selling parts).

Thanx for the tip

I'll look into buying some to try before I change the pup for something else.

Craig