Grabbag/Bin Cleanout Thread

PFDarkside

of the Forum
I’m moving (again) and finally cleaning out a lot of years of acquisitions. Flip me a few bucks for shipping and I’ll send it in a USPS envelope.

First up, Premier Guitar Stocking Stuffers.
i got the same box two years in a row, so there are two “sets”.
1. Daddario Nylon Strap
2. Reverb Clip-On Tuner
3. Sample pack of pick gauges



92485EA0-62CE-4256-B73C-4114C1E899DC.jpg
 
Next up, two solderless patch cables from AMX Audio, GH Plugs. Maybe this will kickstart your solderless revolution or maybe you are two patch cables away from the final rig.

2FE0B4A0-773B-4B69-B26A-354916E969F0.jpg
 
Unopened mini pedal enclosure. I planned on a small pedalboard interface box, but these are good for buffers, boosts and fuzzes too.

718B83F6-F28A-4AF5-AB51-DAEF2BCEDC22.jpg
 
I think this is about 85% of the stuff you need to build a BYOC Muff. Looks like you need a battery clip, LED, a few caps and some wire for leads. Tons of different diodes in that bag, Ge, Si and LED. I think I planned on using switches to change the clipping like the old Beavis Audio Rat did.

3021842B-C35D-491F-8186-11B693B39C7A.jpg
 
I think these are 2 plow 6 way rotary switches? Like Varitone style. 1 long shaft, one short shaft, one long that was cut to short.

74640A98-855E-423E-BDB4-CB0ED85642BD.jpg
 
BYOC Octave Fuzz kit, almost ready to go. Just mount the board, wire the pots, battery and LED and be surrounded by the Purple Haze.

4B838FE0-0F76-48CA-87A8-5B2561848240.jpg
 
Back
Top