Gretsch sound post question

[blakejcan]

So that crazy paint scheme Gretsch (not so white) Falcon that I bought in the other thread. In the description the seller says it is missing the "sound post" somehow.

He believes the guitar is the 6136-55 model which would have the "parallel tone bar" bracing along with a "sound post" that would simply connect the top and back sides with a post under the bridge

MY QUESTION--assuming I rip out the pickups and electronics anyway......it shouldnt' be too hard to put a small post in that goes beneath the bridge and connects front & back? Right? Am I thinking about this wrong? Thanks!​

This was helpful for me. All about the Gretsch bracing types--https://www.gretschguitars.com/support/specs-explained/bracing

And the model we think it is--https://www.gretschguitars.com/gear/build/hollow-body/g6136-55-vintage-select-edition-55-falcon-hollow-body-with-cadillac-tailpiece/2411510805

 

[blakejcan]

I think this is all it is? The post on the right

zz0.6fsfywni23lzz

 

[GuitarStv]

The only 'sound posts' I'm familiar with in musical instruments are little wooden dowels in violins. If it's set up similar, then yeah . . . you just use tweezers or similar to jam the bit of wood into position.

 

[ICTGoober]

That's the neck block.

 

[ICTGoober]

The only 'sound posts' I'm familiar with in musical instruments are little wooden dowels in violins. If it's set up similar, then yeah . . . you just use tweezers or similar to jam the bit of wood into position.

You use a violin post setter. When I still did violin family service for USD 259 I had one.

And to my knowledge, Gretsch guitars never had sound posts.

toqx0xtdcclma5okyc5y.jpg (800×600)​

 

[blakejcan]

This is from the Gretsch site:

Sound Posts

In conjunction with a parallel bracing setup, the Sound Post is a simple wood post that connects the top to the back of the guitar, allowing more synchronicity between them, as well as providing extra strength and support beneath the bridge.

 

[blakejcan]

That's not the neck block. Here is another pic from a different angle

zz0.bbhvamva3hfzz

 

[ICTGoober]

Well, I'll be damned.

 

[ehdwuld]

I would say

You should remove the bridge pickup and use that larger hole to install this

Possibly employ a small child

Maybe not the retired Luthier

 

[ICTGoober]

All my apprentices were very slender, so I made them stick their arms in the small holes of guitars way back when.
Nowadays I have to make a tool.

 

[zionstrat]

Agreed pull out a pup..

But considering there are no pups on violins I'll share a emergency soundpost repair that I may have invented...

In an emergency at a gig with absolutely no chance of getting a post-setter, tie a piece of thread to the top of the post and the bottom of the post.

Get it generally in place with the threads and then use a spoon or knife or anything to whack the bottom a few times to get it settled.

And considering it's time to gig, just stuff the threads in the f holes until you can go back and do it right