H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

[WITH FULL DISTORTION]

Hi GUys, long time no post
Q: (


SO based on that, and in the fact that i want a hard rock tone (crunchy and lots of mids, bass mids and hi mids, singing highs and enought tightness adn boldness on the bass as possible ) But with Metal Improvements(articulation under high gain and tightness)

Which Set of seymour duncans would fit the H-S slots here for my Charvel FUsion Deluxe?!
previously i owned a 5150 1 with a marshall 4x12 with g12t75 but now i switched to mesa boogie dual rectifier solo head 3 channels version and a 2x12 with celestions CREAMBACK 75 w.

I couldnt find a bridge pickup so far that would match the charvel sound, it either lacks bass, mids or treble. thats WEIRD.
but for the neck sot, i used to trust the hot rails neck. but not sure anymore, since i changed Amp.

What do you guys think?
Charvel is tuned to D standard with 012 .

heres a pic of the entire Gang

and a video to check my mesa boogie tone https://www.youtube.com/watch?v=kcuVn9ocy4Y

Thanks in Advance.
JP

 

[dxlxntxxlxr]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

bare knuckles where its at man. if u want huge, tight bass, get a bkp warpig. Put a duncan little 59 in the neck

 

[WITH FULL DISTORTION]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

i already tried several pickups. i have a warpig set with the bridge being the ceramic one. and i already tried the alnico version. fits better. but i want a cheaper alternative this time and not a high output. moderate out be perfect

 

[Chistopher]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

Ya know, I was thinking today about HS guitars and I started to wonder about P-Rails. I thought it might be a cool idea to put a YJM Fury in the neck and put the P-Rails in upside down and have it wired as such:

3-Neck
2-Neck and Rail
1-P90

And then it might be cool to have a 1meg volume and 250k tone and have a blower switch (S1) that bypasses the tone and puts the P-Rails in series.

 

[Masta' C]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

I see you like actives, as well.

Why not try Blackouts in the H-S configuration?

Hits all the points you mentioned and will fit that guitar without modifications

 

[WITH FULL DISTORTION]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

The blackouts may work. Good idea. But no hard rock tone out of them, right??!

 

[dxlxntxxlxr]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

ive got a mint condition (take off) emg 81/85 set kickin around if u want

 

[Mincer]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

I just tried a Cool Rails/Alternative 8 in a Charvel, and man, that was amazing. Pretty nuch what you are describing.

 

[Benjy_26]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

I've never tried an Alt 8, but it'll probably fit the bill, judging from the description.

With that said, I'd personally try a PATB-1b in the bridge, with maybe a HR or CR in the neck. It *should* give you a fairly even response with enough kick to go into metal and enough sweetness to still do rock.

 

[WITH FULL DISTORTION]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

ive got a mint condition (take off) emg 81/85 set kickin around if u want

Hey man, thanks but i have 2 emgs sets laying around here. 81-60,81-85

 

[Masta' C]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

The Cool Rails/Alt 8 setup sounds awesome

 

[DonP]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

Try a J90C and a J200R in the neck.

 

[metalchurch79]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

Nice guitars! Keep in mind youll need a neck pickup with a straight baseplate like OEM Jackson/Charvel and EMG's, not the typical triangle shape. Im sure you know that, but it might limit your options.

 

[Aceman]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

Gonna go different route here. Since you are all about dat bass, mid/bass, mids, and perhaps less top:

DiMArzio - Chopper neck, X2N bridge.*


*I am currently rocking the ^$#$# hails out of an X2N loaded Hello Kitty Strat....might be influencing my suggestion.

 

[Dr.Mavashi]

Re: H-S recomendation for a Charvel Fusion Deluxe Hard rock tone for METAL.

But with Metal Improvements(articulation under high gain and tightness)

To do that and hard rock, Fullshred.