Help With the EVH 50W. Head

Re: Help With the EVH 50W. Head

Too compicated... for a very overpriced chinese or vietnamese amp.

Just get Peavey version for durability or Bugera to save a bunch of dough.

If you want the lower wattage, just pull a power tube pair. Easy.
 
Re: Help With the EVH 50W. Head

I'm asking about this Head + I dont care where it was made , it sounds as good as my other 2 bigger amps
 
Re: Help With the EVH 50W. Head

Kind of confused about what you are asking here. Anyways, the black logo plate is not factory. What are the other questions?
 
Re: Help With the EVH 50W. Head

That top one looks like someone blackened it, I don't think Fender released any official stock versions that look like that.

Version wise I don't think there's a ton of difference until you get to the latest version where you now have two main splits. The earlier models with the shared channel 1 gain/vol/EQ and the new version with the separate channel 1 and channel 2 gain/volume/EQ. There might be slight variations in the early models with the shared channel 1/2 but I don't recall reading about anything significant.
 
Re: Help With the EVH 50W. Head

Adieu said:
Too compicated... for a very overpriced chinese or vietnamese amp.

Just get Peavey version for durability or Bugera to save a bunch of dough.

If you want the lower wattage, just pull a power tube pair. Easy.
Click to expand...

EVH is not made in China, its Made in Mexico. These are fairly reasonable on the used market and i definitely recommend/want the EL34 version.
 
Re: Help With the EVH 50W. Head

KNUCKLHEAD said:
<-- That is Exactly what I was wondering and how to I dentify the Factory upgraded ones
--V V V

Just spoke to Fender and the Upgraded Versions ~ Predom. White + Predominately Black ( Gold + Black = EL34 ) have Stacked Concentric pots for the Gain/Volume which I didn't know or see . He also has owned both and prefers the EL34 Cranked up for the Top end Tones that He said are fuller . I played the EL34 version few weeks ago ( the 6L6 a couple yrs ago) and it did hold up very well Crankin' and the decision part will be harder now ~ between the 2 tube Configs
Click to expand...


Naw , Decided I Have to stay with 6L6 for Tighter Punch ~ in the Dual Pot Config
 
You must log in or register to reply here.
Back
Top