Help With Wiring PIC

[darkshadow54321]

Using this as the base for the wiring:

Where do I solder the pickup wires and toggle wires? This is for a Les Paul. Thanks.


:wizard: <------ gratuitous use of smiley... :nana:

 

[HolyDirt]

first of all, if your wiring lp style wiring, its wrong so far, on the 2 pots on the right(of the picture) the capacitor should be attached to the middle lug of the pots, then ground the left lug(the left lug when looking at the put with the shaft up and lugs pointed towards you) on both of the pots on the right(of the picture)
the hot leads go into the right lugs of the pots on the left(of the picture), one hot lead per pot, then then wire the middle lug of the 2 left pots to the toggle. THERE YA GO!