Help with wiring

[ekasa10]

Looking for a wiring diagram for something I haven't seen. I'm attaching a simple diagram of how I want things to work.

here are some details
Bridge pup - Seymour Duncan stk-s6
Middle pup - Seymour Duncan stk-s4
Neck pup - Seymour Duncan stk-s7
CTS volume pot, two CTS no load tone pots
Three recessed on-on mini Toggles (poles and throw to be determined)
And the treble bleed mod from an American deluxe strat
The part I'm having a hard time with is the middle toggle for series/parallel in position 2 and 4, and the third toggle to be series/parallel for the neck bridge blend.
Last thing is I hate push pulls and push/push pots. If it's not possible I can accept that and move on.
Thanks

 

[beaubrummels]

Re: Help with wiring

I think it's going to be difficult to cram a 5-way blade switch, 3 mini-switches and 3 pots in a standard Strat rout.

 

[ekasa10]

Re: Help with wiring

It fits. There's a pickguard made for the setup. The only issue is wiring it the way I want it to work

 

[ekasa10]

Re: Help with wiring

 

[beaubrummels]

Re: Help with wiring

Wait until you have to solder all the wires.