Here is my new board temporarily wired up!!!!
- Thread starter CrookTele
- Start date
Falloffthebonetone
New member
Re: Here is my new board temporarily wired up!!!!
Dude what kind of wah is that?
Dude what kind of wah is that?
MikeRocker
What's Your Forum Nameologist?
Re: Here is my new board temporarily wired up!!!!
Looks like the Dunlop Jerry Cantrell...
Looks like the Dunlop Jerry Cantrell...
Falloffthebonetone
New member
Re: Here is my new board temporarily wired up!!!!
Cool. I've never seen one before, but I have heard about it. Sounds cool here.
Cool. I've never seen one before, but I have heard about it. Sounds cool here.
Chris of Arabia
Desert RATT
Re: Here is my new board temporarily wired up!!!!
Which of the Pedaltrains is that? Looks a good size.
Which of the Pedaltrains is that? Looks a good size.
CrookTele
New member
Re: Here is my new board temporarily wired up!!!!
Yup! That's the Cantrell Wah. Nice and throaty! I love it. And as far as the size of the pt, it's a Pt 2. Just right and works great. Only thing is, I'll have to figure out a way to raise it at least 3/4 of an inch for my patch interface to fit underneath.
Yup! That's the Cantrell Wah. Nice and throaty! I love it. And as far as the size of the pt, it's a Pt 2. Just right and works great. Only thing is, I'll have to figure out a way to raise it at least 3/4 of an inch for my patch interface to fit underneath.
TwilightOdyssey
Darkness on the edge of Tone
Re: Here is my new board temporarily wired up!!!!
Looks great!
Looks great!
Tune-O-Matic
New member
Re: Here is my new board temporarily wired up!!!!
This might be a way to get your board a little higher:
http://www.beavisaudio.com/projects/boardpimp1/
This might be a way to get your board a little higher:
http://www.beavisaudio.com/projects/boardpimp1/
CrookTele
New member
Re: Here is my new board temporarily wired up!!!!
That looks awesome!! Thanks man!!!
That looks awesome!! Thanks man!!!
Chickenwings
Alnico 6/8
Re: Here is my new board temporarily wired up!!!!
winning- especially that rook.
winning- especially that rook.
Last edited:
Tune-O-Matic
New member
Re: Here is my new board temporarily wired up!!!!
No problem. That was the first thing I though of when you said your board need some height.
You should go for broke and cover the wood side pieces with tolex that matches you amp. I always imagined that would look pretty sweet.
No problem. That was the first thing I though of when you said your board need some height.
You should go for broke and cover the wood side pieces with tolex that matches you amp. I always imagined that would look pretty sweet.
Rodney Gene
O.G.
Re: Here is my new board temporarily wired up!!!!
Keep in mind a bonafide reality with those 'sides' is that your pedal board will not fit in any PT case, soft or hard. If you don't gig (or much), its less of a problem. Even the riser(s) provided by PedalTrain are too high to fit in the provided Pedal Train cases once on the board with an effect on them.
On my own PT3 I made small risers for the second row. Enough clearance even with boots!~ Still fits well in the case (The PT3 case is a massive ATA case).
Cheers!
View attachment 42954
View attachment 42956
Keep in mind a bonafide reality with those 'sides' is that your pedal board will not fit in any PT case, soft or hard. If you don't gig (or much), its less of a problem. Even the riser(s) provided by PedalTrain are too high to fit in the provided Pedal Train cases once on the board with an effect on them.
On my own PT3 I made small risers for the second row. Enough clearance even with boots!~ Still fits well in the case (The PT3 case is a massive ATA case).
Cheers!
View attachment 42954
View attachment 42956
Rodney Gene
O.G.
Re: Here is my new board temporarily wired up!!!!
To Crook, congrats on a great looking board! That's a ton of sweet tone at your feet! Cheers!
To Crook, congrats on a great looking board! That's a ton of sweet tone at your feet! Cheers!
CrookTele
New member
Re: Here is my new board temporarily wired up!!!!
You sir, also have a very nice bord!! The Ethos!!!! Nice mang!! As far as clearance, I'm needing the extra height on the bottom. I have a patch interface that I will mount to the bottom. It's got a tuner out function, buffer and will allow me to either run all my effects to the front of the amp or split them to the loop and the front.
But those risers look sweet!
You sir, also have a very nice bord!! The Ethos!!!! Nice mang!! As far as clearance, I'm needing the extra height on the bottom. I have a patch interface that I will mount to the bottom. It's got a tuner out function, buffer and will allow me to either run all my effects to the front of the amp or split them to the loop and the front.
But those risers look sweet!
Soulcrusher_X
New member
Re: Here is my new board temporarily wired up!!!!
Hey Crook, I was actually just posting in the Agileguy NPD thread above about your pedal demos from the GAB board. I'm Jay over there. lol
Still mesmerized by your board.
Hey Crook, I was actually just posting in the Agileguy NPD thread above about your pedal demos from the GAB board. I'm Jay over there. lol
Still mesmerized by your board.
CrookTele
New member
Re: Here is my new board temporarily wired up!!!!
Thanks brother!! Appreciate the kind words!! And glad to have you over at GAB!!
Thanks brother!! Appreciate the kind words!! And glad to have you over at GAB!!
