Hot-Rails for Strat SHR-1b; straight hum bucker hookup

[Terry50]

Hi,
My new Hot-Rails for Strat SHR-1b Bridge has five wires.
ground, green, red, white, and black.

I don't want any switches or pots. I want to hook the two coils up in series; and drive my sustainiac driver.
The directions do not say which colors go with which coil; and the directions do not say which colors are the start of the winding and which colors are the end of the winding. I want the quietest strong signal possible, please. How should I solder this?

Thank you for your help.

Terry

 

[PFDarkside]

Re: Hot-Rails for Strat SHR-1b; straight hum bucker hookup

Red and white soldered together and taped off, green and bare to ground, black to hot.

Enjoy!

 

[Terry50]

Re: Hot-Rails for Strat SHR-1b; straight hum bucker hookup

Red and white soldered together and taped off, green and bare to ground, black to hot.

Enjoy!

Thanks. What does the PF stand for? PFDarkside....

 

[PFDarkside]

Re: Hot-Rails for Strat SHR-1b; straight hum bucker hookup

I'll give you a hint...