Re: How do I refinish my guitar?
1 Sand with 600 Wet and Dry paper to feather out paint.
2 Wipe down with a tack rag or rubbing alcohal.
3 Wait until dry then mask off with masking tape.
4 Spray on primer/sealer.
5 Having read the can previously use correct thinner to remove overspray.
6 Wait to dry THEN use thin coats of the correct paint, it's a Gothic so any flat/satin black should suit. Not really sure what type of paint Gibson use, so find out!
7 Sand between coats with clean 600 along the grain and wipe down, about 4 coats should do.
8 Wait 24 hours and blend with 0000 wire wool, remove masking tape first and compare with the rest of the finish.
9 Buff with Meguiars Cut and Polish.
Should be close enough, Gibson Gothics are supposed to be rugged so don't be too fussy.
P.S. Use your brain and ask the local hardware store!