How should I be lining up my Effects?

DARTHWOLFGANG

New member
The effects I have are as follows:

Boss TU-2,Boss OD-20(distortion modeler),Boss CH-1(chorus),Dunlop Wah pedal,Boss Compression.

This is the order that they are in now,but I can't get the Chorus to work.I also have them daisey-chained together with a singular power source,so no batteries are being used.Can anyone help a brother out?Thanks

GLENN
 
Re: How should I be lining up my Effects?

id go:
tu2-wah-od20-cs2-ch1

the chorus would sound best in the fx loop
 
Re: How should I be lining up my Effects?

Jeremy,
Yes it does,but this is the first time I've daisey-chained it.Should I take out the 9 volt battery?The LED on the CH-1 is working,so it's obviously getting power.I'm baffled :smack:
 
Re: How should I be lining up my Effects?

jeremy said:
id go:
tu2-wah-od20-cs2-ch1

the chorus would sound best in the fx loop

Sounds like Jeremy hit it right on the nose to me. An effects loop is one thing I miss in a DRRI, but am glad they put one in the DeVille. Cuts down on line noise considerably.
 
Re: How should I be lining up my Effects?

Midnite Man,

At the risk of sounding like an idiot,can you explain to me the effect looping procedure?I'm (ironically)playing through a Deville 212 :wink: I'm looking at the top of the amp trying to figure out how to loop the chorus pedal.Do I plug it into the preamp out and power amp in?Sorry if I sound like a complete moron :duh: But Thanks for the help.
 
Re: How should I be lining up my Effects?

i'm not familiar with the deville but if there is an fx loop then, all you need to do is put a cable from the fx loop "send" to the chorus "in" then another cable from chorus"out" to fx loop "return"...
so basically yes your putting the chorus after the pre-amp but before the power stage

Good luck

y2stevo
 
Back
Top