how to connect Kemper AND PC to same headphones?

nognow

New member
I really like my Kemper amp, but I wish I could somehow combine the Kemper signal with my pc audio signal so I could use guitar pro ,band-in-a-box,playbacks or just a metronome...
I wanted to buy simple headphone Y-splitter cable ,like this one:
http://www.amazon.com/dp/B00APEI7OC/?tag=stackoverfl08-20

but I read somewhere that it might damage the audio sources
is that true?
has anyone tried something similar to this?
 
Re: how to connect Kemper AND PC to same headphones?

Use an interface, like Presonus' Audiobox. Connect Kemper. Connect headphones to interface. Play track. Done. :)
 
Re: how to connect Kemper AND PC to same headphones?

Use an interface, like Presonus' Audiobox. Connect Kemper. Connect headphones to interface. Play track. Done. :)

I don't have one...and I don't wanna spend 100$ just for that...
 
Re: how to connect Kemper AND PC to same headphones?

What soundcard does your computer have?
 
Re: how to connect Kemper AND PC to same headphones?

I use a little 12 channel Behringer mixer for Computer, Phone, Keyboard & POD into headphones and monitors. (4 mono sources and 4 stereo sources) a 4 channel or 8 channel may work for your needs.
 
Re: how to connect Kemper AND PC to same headphones?

A Y-cable shouldn't hurt anything, but for ease of use, invest in a cheap mixer like PFDarkside wrote. Or buy an interface to get the digital version of a mixer.

That way you get way better audio fidelity.
 
Re: how to connect Kemper AND PC to same headphones?

A Y-cable shouldn't hurt anything, but for ease of use, invest in a cheap mixer like PFDarkside wrote. Or buy an interface to get the digital version of a mixer.

That way you get way better audio fidelity.

are you sure it would hurt the audio quality?
it's just a passive parallel blend (like two pickups basically)
 
Re: how to connect Kemper AND PC to same headphones?

Well, you connect headphones to two different headphone amps and use their volume to blend the signal. It will probably work a-ok, but there are better solutions.

Just remember, headphone outputs are usually just stereo. A Y-cable is a stereo input to L and R, or vica versa. So you can not have stereo out from Kemper and computer at the same time. Unless you use a mixer that sums the signal to a singel stereo output. See? :)
 
Re: how to connect Kemper AND PC to same headphones?

Does the Kempar have an aux in?

*(Sent from my durned phone!)*
 
how to connect Kemper AND PC to same headphones?

Actually, just checked the manual. You can use return and alternativ in on the back off the kemper as a stereo aux in for mp3 players and whatnot.

Whaddayaknow. :)

Nognow: check your kemper manual. And you'll need a mini stereo jack -> 2x TS cable.
 
Last edited:
Back
Top