poweredbysoul
New member
Found one used. the sticker is pealed off from the back. I opened it up and the circuit board said Citzen, and the ac adapter jack said japan on it. Is there a definite way to identify.
Thanks
Thanks
How to identify a Boss SD-1 Japan?
- Thread starter poweredbysoul
- Start date
Rich_S
HomeGrownToneBrewologist
Re: How to identify a Boss SD-1 Japan?
Look for a serial number on a sticker under the pedal (in the battery compartment, then go here: http://www.bossarea.com/.
There's a serial number lookup that will tell you if it's MIJ. If no serial number, it was probably on the bottom label, and that would make it MIT.
Also, if it has the modern, small power adapter jack, its MIT, but the big. old-style jack could be either.
Look for a serial number on a sticker under the pedal (in the battery compartment, then go here: http://www.bossarea.com/.
There's a serial number lookup that will tell you if it's MIJ. If no serial number, it was probably on the bottom label, and that would make it MIT.
Also, if it has the modern, small power adapter jack, its MIT, but the big. old-style jack could be either.
Similar threads
