HSH both buckers series/parallel possible with one switch?

[Nagisa]

I have an Ibanez AZ hss guitar that I am turning into:
HB bridge (Suhr Aldrich)
Middle single coil (True velvet)
Neck single coil sized hb (Satch Track)

The guitar came with one dpdt switch. It has 1 vol, 1 tone.

On the Dimarzio site I can see how to do series/parallel for EITHER bridge OR neck hb, but
I am wondering if one switch could do both.

I don’t want to install a push/pull pot or an additional dpdt switch, though if there is a new switch that would achieve this as a replacement for the dpdt I’d get it.

At worst I’ll do a parallel split for the neck only.

Thanks!

 

[AlexR]

Re: HSH both buckers series/parallel possible with one switch?

You will need a 6x4 switch for both pickups parallel.....so 2 of the 3x2 lugs (in one switch) that you get in the typical DP mini toggle or pushpull

 

[Nagisa]

Re: HSH both buckers series/parallel possible with one switch?

You will need a 6x4 switch for both pickups parallel.....so 2 of the 3x2 lugs (in one switch) that you get in the typical DP mini toggle or pushpull

Thanks! I was hoping there was a different switch like that that would work

 

[Artie]

Re: HSH both buckers series/parallel possible with one switch?

You just need a 4PDT switch. Like this:

https://www.parts-express.com/4pdt-mini-toggle-switch--060-524?utm_source=google&utm_medium=cpc&utm_campaign=pla