I want to be able to coil split a neck and a bridge with an on off type switch but yet use the 5 way to select pickups in the same manner as a standard strat. I have seen the coil split schematic for using noise canceling in the 2 and 4 position. I want that plus I want to be able to coil split the neck or bridge and select them with the 1st and 5th position just like a regular strat. Any wiring diagrams to do this?
As a side note I only want the 3rd position to select the single coil middle only. I never use both neck and bridge humbuckers.
As a side note I only want the 3rd position to select the single coil middle only. I never use both neck and bridge humbuckers.
