HSH with push-push for blower switch like coil tapping

[RobinPlas]

I'm researching for some time now, but have trouble finding a schematic for a project I like to start. I hope someone can guide me to the right direction!

Guitar is HSH, one volume and one tone with a five way super switch that gives me this configuration (which I don't want to change):
1. Bridge HB
2. Bridge SC + Middle SC
3. Middle SC
4. Neck SC + Middle SC
5. Neck HB

I want to replace my tone pot with a push-push so that in the up position it gives me the inner coils of the bridge and neck pickups in parallel regardles of switch position. Kind of like a blower switch but instead of directing the bridge HB directly to the output I want the bridge and neck to be split and become active while completely overriding the switch position.

Hope you guys can help me out!

 

[AlexR]

Re: HSH with push-push for blower switch like coil tapping

I'm not sure you will have enough lugs with a pushpull. You have to engage 2 pickup coils plus then also switch the output sources. Might need a 3x3 or more matrix to get that going.

 

[gregory]

Re: HSH with push-push for blower switch like coil tapping

Not only do you have to engage two coils, he's asking they be in series. The switch's ability to combine coils also needs to be disabled, and likely also the auto-split function.

I'm not so sure this is even possible with a 4PDT S1 switch. The OP must really like the inner coils in series. I've tried it: not my cup of tea, that's for sure.