HSS guitar: wich ssl-1 in middle for hum-canceling with Dimarzio Humbucker north coil

[MarioCesar]

Hi guys,
I have two Seymour Duncan ssl-1, one of them is rwrp. I want to put a Dimarzio Air Zone in the bridge. The idea is to have auto-split in position 2 of the switch.
Which ssl-1 should I put in the middle position for hum-canceling with the north coil of the Dimarzio?

 

[gregory]

Re: HSS guitar: wich ssl-1 in middle for hum-canceling with Dimarzio Humbucker north

Put the one that attracts the north coil of the Air Zone in the middle. If the coil you want to use is actually the north coil then the single you put in the middle will be the standard one. Put the rwrp one in the neck.

 

[MarioCesar]

Re: HSS guitar: wich ssl-1 in middle for hum-canceling with Dimarzio Humbucker north

You are right, the north coil of the dimarzio attracts with the standard ssl-1. Let's see if I need to swap the cables

 

[gregory]

Re: HSS guitar: wich ssl-1 in middle for hum-canceling with Dimarzio Humbucker north

All three pickups should be in phase with standard wiring: black is ground and white is hot for the Duncan singles, green is ground and red is hot for the DiMarzio humbucker.