Hum-Single-Hum Wiring Question

[glmusic]

Hi all,

I would like to know how you in the know would wire the following:

Hum - Single - Hum with one volume, one tone, one mini DIP to split humbuckers, 5-way pickup selector

I would like the mini DIP switch to simply switch both humbuckers to single or full humbucking mode so that I can have the standard five combinations on the pickup switch with the only difference being whether or not the humbuckers are singlel or dual coil.

I could not find a diagram on the main site for this config. They all split the humbuckers with the 5-way rather than a mini DIP.

Any help would be appreciated very much.

 

[pinto79]

Re: Hum-Single-Hum Wiring Question

Wire the pups to the switch like you would 3 singles, and run the split wires (red and white in Duncan't case) to the mini switch. You can split both together or use two switches to split them individually. If you use 2 On/On/On switches, you could select either HB as split/series/prallel also...