SwedishxMetal
New member
A two pickup guitar with 2 volume, 2 tone and no selector or toggle switch. Can someone direct me with a diagram or a link? Any help would be appreciated. Thanks
I need some help with wiring....
- Thread starter SwedishxMetal
- Start date
rspst14
Tone Cat
Re: I need some help with wiring....
How do you plan on switching between the two pickups? You'd need to use a push/pull pot if you're not going to use a toggle switch. Or, you could probably wire it so that both pickups are always on, and turning the volume all the way down turned one pickup off. Not sure if you would run into problems with that, Artie and Kent are our resident wiring gurus, I'm sure one of them can answer that for sure. By the way, welcome to the forum.
Ryan
How do you plan on switching between the two pickups? You'd need to use a push/pull pot if you're not going to use a toggle switch. Or, you could probably wire it so that both pickups are always on, and turning the volume all the way down turned one pickup off. Not sure if you would run into problems with that, Artie and Kent are our resident wiring gurus, I'm sure one of them can answer that for sure. By the way, welcome to the forum.
Ryan
Last edited:
Artie
Peaveyologist
Re: I need some help with wiring....
If you truly don't want a selector switch, (both pups on all the time), then just use the normal 2-pickup, 2-vol, 2-tone, diagram, but short the wires together. Thats all a switch does.
Like this: 2hb_2vol_2tone_no_switch
Artie
If you truly don't want a selector switch, (both pups on all the time), then just use the normal 2-pickup, 2-vol, 2-tone, diagram, but short the wires together. Thats all a switch does.
Like this: 2hb_2vol_2tone_no_switch
Artie
