Important Tech Support News for Wiring

[Radeon]

Tech support at SD is awsom so is RG and the rest of guys who tried to help me out. IT seems that since I replaced the stock pickups with a JB, Hotstack, and Jazz which are hum canceling the wiring for the Ibanez 270 DX was off I rewired and what a difference so I will share it here.

this is s H-S-H with one tone and one volume pot nothing fancy.

soldering points of the 5 way pointing towards you as you look the the switch.

1 = Black of neck ->Jazz
2 = Black of Middle -> Hot Stack
3 = Black of Bridge -> JB
4 = Vol Pot
5 = open
6 = open
7 = open
8 = open

Green and bare are soldered to ground and the red and white are solderded together and taped off.

Please review and let me know what you think. I hope this will help some one else out too. I would like to make a drawing and will if I can find the time. Again thanks to all of you for your help and patience with a noobe like me. :fing2:

 

[Infecto X]

Re: Important Tech Support News for Wiring

Thanks for the post! I'm glad I saw it. I had just finished wiring my pu's when I saw this and realized I made a mistake. If you get something drawn I'd appriciate a copy.

Thanks!

Infecto X

 

[prog4eva]

Re: Important Tech Support News for Wiring

hi im also a total wire noob and i could really use the diagram as ive tried so many different sites,i have an ibanez rg550 with jb4 bridge,standard inf single,jazz sh2 in the neck (not wired yet lol) single vol,single tone,,,and i dont want a mega switch,just plain and simple i want to replace the v,s with the seymours,id really appreciate all the help i can get as the seymour duncan site diagrams and the ibanez diagrams dont seem to help me much.thanks

 

[Artie]

Re: Important Tech Support News for Wiring

Basically, this is it:

Just omit the side with the 2's.