Inner Outer Coil Split Wiring

[String Machine]

Hi!

im new here on the Forum and i was try to find a solution for my without sucess.
Maybe someone can help me with the Wiring Diagram i need
I have a Charvel Sol Cal with HSH Seymour Duncan TB6 - SSL5 - SN6 and a 5 Way Switch with Two Pots, Volume and Tone.
All i wanna do is to switch with a Push Pull Knb between inner and outer Coil on The Neck like on this Picture
Hope someone can com up with a wiring for me

Thanks :18:

 

[jeremy]

looks like it might just be a phase switch for the neck pup?

 

[String Machine]

Got it!
Just have to swap the black one with the green wire on Booth Pickups.
Otherwise the phases are reversed but how do I do that with the middle single coil?
Do I have to reverse the phases there too?




​

 

[jeremy]

no, just on the neck pup with the switch. the neck and bridge pups are never on together so there is no issue there. the phase switch will let you pick what split coil is active on the neck pup.

 

[Artie]

I don't think this has to do with phase. I think it just selects which coil is active on the neck when split, while also making the neck split when used by itself. It would be nice to see the original wiring diagram.

I would try this. The first diagram is the standard Duncan diagram for HSH auto-split used for reference. The 2nd diagram is the mod. Note that the "switch" part of the push-pull could be on either pot. The red lines represent the old red/white, and the blue is the new connection.