Is it bad? Mini Recto question...
- Thread starter lex666
- Start date
ratherdashing
Kablamminator
Re: Is it bad? Mini Recto question...
Can't you daisy chain the two cabs into the 8 ohm output? Two 16's in parallel will give you 8.
Can't you daisy chain the two cabs into the 8 ohm output? Two 16's in parallel will give you 8.
schecterplayer
New member
Re: Is it bad? Mini Recto question...
Ratherdashing is correct. You definitely do not want to run a 16 ohm cab off a 4 ohm winding, and even the 8 ish still a mismatch so it won't sound as good. Run them both in parallel into the 8 ohm plug.
Ratherdashing is correct. You definitely do not want to run a 16 ohm cab off a 4 ohm winding, and even the 8 ish still a mismatch so it won't sound as good. Run them both in parallel into the 8 ohm plug.
lex666
New member
Re: Is it bad? Mini Recto question...
My cabs are not set up to do this...
...any recommendations on how this can be done?
Both cabs only have only a single input. :smack:
My cabs are not set up to do this...
...any recommendations on how this can be done?
Both cabs only have only a single input. :smack:
Maynardo
New member
Re: Is it bad? Mini Recto question...
Maybe one of this things could help you
http://www.tonebone.com/tb-cabbone-using.htm
Maybe one of this things could help you
http://www.tonebone.com/tb-cabbone-using.htm
schecterplayer
New member
Re: Is it bad? Mini Recto question...
That's not what he needs at all. The cab bone is for switching between two different cabs, he just wants to run two at once. All you need is a 1/4 " Y cable made with speaker wire, you could make one yourself easily and I'm sure someone sells them.
That's not what he needs at all. The cab bone is for switching between two different cabs, he just wants to run two at once. All you need is a 1/4 " Y cable made with speaker wire, you could make one yourself easily and I'm sure someone sells them.
MojoMonster
Active member
Re: Is it bad? Mini Recto question...
MB actually says this in their owners manual:
You need a parallel box to plug the two cabs in and then into the 8 ohm jack (#7 diagram, page 27).
MB actually says this in their owners manual:
You need a parallel box to plug the two cabs in and then into the 8 ohm jack (#7 diagram, page 27).
Last edited:
tone4days
Heel Whacker
Re: Is it bad? Mini Recto question...
you can build a parallel box for less than 5 bucks and a half hour with a soldering iron
just be careful to get the polarity correct .. and if you don't, just swap the wires til you do
you'll need three 1/4" female jacks (jills?) and a little project box ... plug the output of the head to one jack marked 'input' .. inside the box, wires the tip of the 'input' jack to each of the tips of both the other jacks (marked 'output one' and 'output two') ... wires the input's sleeve to the sleeves of the output jacks ... hook up the 16 ohm cabs to the 'output' jacks and the 8 ohm output of the head to the 'input' jack
you can build a parallel box for less than 5 bucks and a half hour with a soldering iron
just be careful to get the polarity correct .. and if you don't, just swap the wires til you do
you'll need three 1/4" female jacks (jills?) and a little project box ... plug the output of the head to one jack marked 'input' .. inside the box, wires the tip of the 'input' jack to each of the tips of both the other jacks (marked 'output one' and 'output two') ... wires the input's sleeve to the sleeves of the output jacks ... hook up the 16 ohm cabs to the 'output' jacks and the 8 ohm output of the head to the 'input' jack
ratherdashing
Kablamminator
Re: Is it bad? Mini Recto question...
Make sure it's a 2 mono to 1 mono Y though, not a 2 mono to 1 stereo.
Make sure it's a 2 mono to 1 mono Y though, not a 2 mono to 1 stereo.
lex666
New member
Re: Is it bad? Mini Recto question...
Fargin' Marshall...
Their 2x12 JCM2000 Triple Super Lead cabs are 16ohm. :smack:
Fargin' Marshall...
Their 2x12 JCM2000 Triple Super Lead cabs are 16ohm. :smack:
Robert S.
Super Moderator
Re: Is it bad? Mini Recto question...
Sure as shoot, two 8 ohm speakers wired in series.
you might try a swap with someone that had 4 16 ohm speakers but wanted an 8 ohm 412.
You can make a Y cable easy enough, speaker wire isn't sheilded so you can get the leads through the barrel of a 1/4" jack.
Sure as shoot, two 8 ohm speakers wired in series.
you might try a swap with someone that had 4 16 ohm speakers but wanted an 8 ohm 412.
You can make a Y cable easy enough, speaker wire isn't sheilded so you can get the leads through the barrel of a 1/4" jack.
Robert S.
Super Moderator
Re: Is it bad? Mini Recto question...
Sure as shoot, two 8 ohm speakers wired in series.
you might try a swap with someone that had 4 16 ohm speakers but wanted an 8 ohm 412.
You can make a Y cable easy enough, speaker wire isn't shielded so you can get the leads through the barrel of a 1/4" jack.
Sure as shoot, two 8 ohm speakers wired in series.
you might try a swap with someone that had 4 16 ohm speakers but wanted an 8 ohm 412.
You can make a Y cable easy enough, speaker wire isn't shielded so you can get the leads through the barrel of a 1/4" jack.
Similar threads
