Is this what I will need......

[moto]

....to install a Vintage or Antiq P90, and not have to screw into the body & I can mount it doggy-style, & adjust height like a H'bucker??

 

[DavidRavenMoon]

Re: Is this what I will need......

Yes


Sent from my iPhone using Tapatalk

 

[moto]

Re: Is this what I will need......

Thanks, but just to clarify, i want to be able to install non-dogear p/u's in a pickguard & just have H'bucker style height adjustments, and NOT dogear covers. Are we on the same page, & is this really what i need?

 

[moto]

Re: Is this what I will need......

THIS is what i am looking for:

 

[hamerfan]

Re: Is this what I will need......

No.
The bars on the picture are homemade. I also dont see how the baseplate is attached to bars.

The stew mac baseplates dont fit without major modifications. The distance of the height adjusment screws of a humbucker isn't compatible with the dogear. I read of a guy who flattend the side tabs and drilled new holes to get it straight.

But this is the vintage real deal:
http://i35.photobucket.com/albums/d196/SLawing/P1000896.jpg

 

[GuitarDoc]

Re: Is this what I will need......

The stew mac baseplates dont fit without major modifications. The distance of the height adjusment screws of a humbucker isn't compatible with the dogear. I read of a guy who flattend the side tabs and drilled new holes to get it straight.

But this is the vintage real deal:
http://i35.photobucket.com/albums/d196/SLawing/P1000896.jpg

He could have just turned the mounting baseplate upside down.

 

[KNUCKLHEAD]

Re: Is this what I will need......

No. The bars on the picture are homemade. I also dont see how the baseplate is attached to bars.

The Pickup screws come thru the bottom where the 2 Red Dots are

 

[zozoe]

Re: Is this what I will need......

So HAMERFAN, where can those mounts you pictured be had, or are they homemade? Thnx

 

[misterwhizzy]

Re: Is this what I will need......

I can mount it doggy-style...

I just wanted to make sure this didn't get lost.

 

[zozoe]

Re: Is this what I will need......

I'm glad at least one person noticed & commented. That's what happens when i post very early in the A.M.
��

 

[zozoe]

Re: Is this what I will need......

In the picture at the top ofthe thread, there's no threads on those ears, so how does the pup attach? And that entire goes under the bridge, & i want just two adjustment screws on the face of the pickguard, right?

 

[KNUCKLHEAD]

Re: Is this what I will need......

if U want screws on the Pickguard , U Tap the Adapters . if U want to pre-adjust the pickup height under the Pickguard , no Threads in Adapter ( just holes for Screws to go thru) and use foam or whatever for the Back-pressure dropping the pickguard over them . the Adapters can be the Bars , micarta size of Pickup , Any number of configs

 

[Zombiwoof]

Re: Is this what I will need......

On my SG Classic, it has that type of slotted-end baseplate, which uses little threaded clips on each end that accept the adjustable mounting screws. This is for going in a large batwing pickguard, with the pickups mounted in the pickguard. It is basically a dog-ear plate that is mounted upside down, using the threaded clips to attach it to the pickguard. I don't know where you get the threaded clips though.
Al

 

[KNUCKLHEAD]

Re: Is this what I will need......

https://forum.seymourduncan.com/showthread.php?335009-THIS-is-what-I-need-for-P90-Mounting!!