JB Junior Phasing in Strat

esquire55

esquire55

New member
This is probably an old subject, but search didn't turn it up. I've put a JB Junior in the bridge of an American Strat and got it to work (of course) by reversing the lead-ground wires. The notch position above it is then out of phase (which doesn't really bother me) but i"m wondering if there is a way to have the whole enchilada. Thanks
 
Re: JB Junior Phasing in Strat

With a JB in the bridge, the only position where phase is an issue would be the #4 notch position. If you reverse the wires for that position to be in phase, all other positions will be in phase also.

Am I understanding your question correctly?

Artie

(I'm assuming #4 to be the bridge/middle position.)
 
Re: JB Junior Phasing in Strat

Thanks Artie, you understood me correctly.

Darkside I was referring to the necessity when combining Duncan and Fender pu's of reversing the hot and ground wires on the Duncan to get proper phasing.
 
You must log in or register to reply here.
Back
Top