JB Split?

repulse87

New member
How does the JB sound split? Its another factor of consideration as i'm comparing it with a C5. I heard the C5 will split better and sound better. I'm set on a 59' neck. Btw, is the JB = JEFF BECK or JAZZ BLUES?
 
Re: JB Split?

the jb was made for a guitar god back in the day, but there is no contract so jb stands for jazzy blues.

id say the jb sounds just as good as the c5 split, more mids with less bottom
 
Re: JB Split?

The JB has the most satisfying tone when split of any bridge humbucker I've ever used. Excellant split and parallel tones.
 
Re: JB Split?

another vote for the split JB. It has more depth than a lot of strat SC pups! I actually like it better split than unsplit for some stuff.
 
Re: JB Split?

Lewguitar said:
The JB has the most satisfying tone when split of any bridge humbucker I've ever used. Excellant split and parallel tones.

I agree. I had a split JB in the neck of a Les Paul, and it was very stratalicious.
 
Re: JB Split?

mrid said:
I agree. I had a split JB in the neck of a Les Paul, and it was very stratalicious.

I was just composing a "glad I didn't sell it" post, when I got your PM. Nice timing. :laugh2:
 
Re: JB Split?

mrid said:
I agree. I had a split JB in the neck of a Les Paul, and it was very stratalicious.

how would a Jazz Neck sound if it were split? has anyone ever split botht eh Jazz and JB in their guitar? what were the results?
 
Re: JB Split?

deftgala said:
how would a Jazz Neck sound if it were split? has anyone ever split botht eh Jazz and JB in their guitar? what were the results?

I do it all the time. Seems like every Les Paul I've put Jazz/JB pickups in the customer has asked for them to be splittable.

In the bridge position a split Jazz might be a little weak but in the neck position it splits beautifully, IMO.
 
Re: JB Split?

deftgala said:
how would a Jazz Neck sound if it were split? has anyone ever split botht eh Jazz and JB in their guitar? what were the results?

I have a JB bridge and a Jazz neck with an SSL-1 mid in my "strat".

I love the split sound of both HBs, especially together with the SSL-1
 
Last edited:
Re: JB Split?

hmmm.... advocators of the split Jazz/JB combo are inticing me make the jump and do that to my LP...

maybe I should take it to the local guitar shop tech, or is it a simple procedure, i've never done it before?

curious indeed <pondering in extreme bliss>
 
Re: JB Split?

deftgala said:
hmmm.... advocators of the split Jazz/JB combo are inticing me make the jump and do that to my LP...

maybe I should take it to the local guitar shop tech, or is it a simple procedure, i've never done it before?

curious indeed <pondering in extreme bliss>


fairly simple: replace the volume pots with push-pulls, re-wire the whole thing - done.

Consider the satisfaction after modding your own guitar. :dance:
 
Re: JB Split?

Arkitkt said:
fairly simple: replace the volume pots with push-pulls, re-wire the whole thing - done.

Consider the satisfaction after modding your own guitar. :dance:


hmmm..... that sounds simple enough... well, do they sell 500k0 CTS push-pull pots???

this sounds simple enough... but which side of the double humbucker becomes the split?
 
Re: JB Split?

deftgala said:
hmmm..... that sounds simple enough... well, do they sell 500k0 CTS push-pull pots???

this sounds simple enough... but which side of the double humbucker becomes the split?

1. Yes
2. Whichever one you want (check the wiring schematics on the SD website - they should have the pattern you're looking for. If not, you will get help here)
 
Re: JB Split?

If you connect the red/white combo to ground, you split to the stud coil.
If you connect the red/white combo to "hot", you split to the screw coil.

Here's a drawing I made for someone awhile back using push/pull pots.
One pp splits both pups. The other selects inside or outside coils.

Of course, you can use one for each also.

dual-split.jpg


Edit: Note that thats an old drawing. It gives the impression that green and white are one coil, and black and red are the other. Thats backwards. Its green and red / black and white. That doesn't affect the way it works, or connects, its just an illusion in the drawing. ;)
 
Last edited:
Back
Top