Line6 DL4 loop sampler -problem

[Muhri]

Hey guys,
i have a problem with my new line6 dl4.
if i record something the looped signal is very quiet (and yes , MIX is turned up )
i hope there's a way to fix it.


thanks,
muhri

 

[Mincer]

Re: Line6 DL4 loop sampler -problem

hmm, never heard of this before...are you using an exp pedal? does this happen with delays too? is it with both AC power and/or batteries? have you turned mix down and then up again?

 

[Muhri]

Re: Line6 DL4 loop sampler -problem

i tried it again and it works now. though i don't know why.i didn't change anything.o0

thanks anyway

 

[Gearjoneser]

Re: Line6 DL4 loop sampler -problem

On Line 6 Amps, you can clear the logic by holding down the 4 buttons, then powering up. I wonder if that works for L6 pedals too? Anyone know?

 

[Young Angus]

Re: Line6 DL4 loop sampler -problem

There is definitely a total reset which is done by a similar procedure. It's possible that although you might have the mix knob turned all the way up, the unit may have reverted back to a preset programmed into one of the buttons which has the mix turned down. When you press back to a preset setting, the position of the knobs doesn't make any difference. The only time the position of the knobs will actually make a difference is when you turn them AFTER you have selected your preset or delay type.

Did I just really confuse myself and everyone else :smack:

 

[LesStrat]

Re: Line6 DL4 loop sampler -problem

Having heard/watched Mincer's clips, I'm interested in this topic. Not just resolving the issue, but the looping capabilities of the DL4.