Looking for help with HSH wiring diagram, HSH 1x Vol, 2x tone

[moshjack]

I’ve decided to order up some Fishman Fluence pickup for this strat. I ordered a set of classic humbuckers for the neck and bridge, and a single spaced SSA for the middle.

They have a diagram in place for the HSH with only 1 tone knob, but I would like to have 2 tone knobs per the original configuration with the second push/pull tone knob for the bridge pickup and activating “HFT". I ordered a pick guard and a 5-position super switch to be able to match the wiring as the diagram shows, but I will need some help with the wiring diagram for adding the second tone pot.
I’d like to do use the “pull” on the neck tone pot to activate voice 2 for neck and bridge hum buckers (as shown already in the diagram, which is great), and the “pull” on the bridge tone pot to activate the “HFT” feature (wires are simply terminated un the below diagram.)
The 5 position switch assignments shown in the HSH wiring diagram would be fine to keep.

Can anyone here help with a diagram? I'm finding conflicting drawings in regards to adding the second tone pot.

Here is the link to the relevant Fluence HSH wiring diagram: https://www.fishman.com/wp-content/uploads/2017/03/SSA-HSH-Wiring-Diagram-Volume-Tone.pdf

Thanks everyone, hope you can help! I have searched high and low, but cannot find exactly what I need as of yet.

 

[moshjack]

Re: Looking for help with HSH wiring diagram, HSH 1x Vol, 2x tone

Maybe just help with the correct way of adding a tone pot to control just the bridge pickup? I understand ground to the jack, and output from the super switch, ground to the other? I just want to make sure I get it right in regards to how the volume knob controls all 3 pickups.