Made my first post-firmware update Mooer GE300 Tone Capture profile..

[Phantasmagoria]

The last time I tried to do a tone cap with this amp..it turned out pretty weird/noisy...but this time around it sounds great.

Raw 'Tone capture' (solo) followed by the actual amp (@ 0:48) for comparison..

 

[Phantasmagoria]

Re: Made my first post-firmware update Mooer GE300 Tone Capture profile..

..and the Tone cap profile With some EQ and FX...

 

[TwilightOdyssey]

Re: Made my first post-firmware update Mooer GE300 Tone Capture profile..

Sounds good!

 

[Phantasmagoria]

Re: Made my first post-firmware update Mooer GE300 Tone Capture profile..

Thanks!

 

[The JEM Ghost]

Re: Made my first post-firmware update Mooer GE300 Tone Capture profile..

Pretty close to the original thing as far as I can hear with these crappy speakers

 

[Phantasmagoria]

Re: Made my first post-firmware update Mooer GE300 Tone Capture profile..

Yeah, it does get really close..I've made some great profiles with my amps...really happy with the Tone cap feature. It works great :bigthumb:

 

[Phantasmagoria]

Re: Made my first post-firmware update Mooer GE300 Tone Capture profile..

Did another Tone capture this time with my Laboga 30 W Plus head.

This is using the raw (no post production) tone cap profile in both modes ("normal" @ 0:00 & "distinct" @ 2:04 which is a bit more defined/sharper). The Mooer has both those modes for all amp profiles and tone caps..

It turned out really close as usual, though I did'nt record the original amp this time...

At the time of doing the tone capture I had the amp dialed in to taste ..while the Goldea amp tone cap up there was done with everything at 12:00 o'clock (flat). No sure if I should do it this way or that way...but this was pretty much "mix ready" so I think I'll dial my amp's in and then do the tone caps. Seems like a better way to go.. :bigthumb: