Make a pot work backwards?

[rawpowerocks]

A bit of a weird question but
I want to wire up a Telecaster with the Broadcaster (With Blend) Wiring.
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=broadcaster_blend
With this wiring the pot that acts as the blend pot works by turning it fully clockwise is the bridge pickup and turning it anti clockwise starts to add the neck pickup.
Can I wire this so that the blend pots works the other way round?
So turning it clockwise adds the neck pickup and anti clockwise is just the bridge pickup.
Is it just a case of wiring the cable that comes off the pickup selector on to the blend pot on to the right hand side lug and not the left side like in the diagram?

Sorry if this is a real stupid question but I don't know much about how pots work.
If anyone can help that would be great

 

[Zhaggy]

Re: Make a pot work backwards?

Yes just wire the wire that comes from the selector to the outside lug of the pot (left if you watch the diagram) and wire it to the other outside lug of the pot instead (which is the right one in this case).