Marshall TSL 100 reverb issue

[ricky_kodadek]

I have a TSL 100 Head that is making some crazy noises when the reverb is on. It sounds like you can hear the springs vibrating through the speakers. If you tap the amp, or have a nearby bass, or kick it you can hear sounds like springs rattling around coming out of the speakers. The amp sounds fine when the reverb is off. It took a fall when the 1/2 stack was tipped over a couple months ago. I did a complete JJ retube, and replaced the stock 2 spring tank with an Accutronics 3 spring long dwell, and it made no difference. I could find no physical damage inside the amp, and no loose connections. Any thoughts, or ideas here would be greatly appriciated. You can email me:
ricky_kodadek@yahoo.com

 

[Kommerzbassist]

Re: Marshall TSL 100 reverb issue

Are you shure it's not the normal tube rattle? I think this is a problem with many tube amps... how loud is the noise?

 

[ricky_kodadek]

Re: Marshall TSL 100 reverb issue

This is for shure not normal. The noises can be louder than the amp cranked up. This only started after the amp took a fall.