MortalCoil Package Contents
- Thread starter zaius55
- Start date
Does it have pots and a jack? Am I missing something or is this information very sparse.
According to the product page:
MortalCoil installs easily as a drop-in upgrade for many existing active setups and includes all required pots and wiring.
MortalCoil installs easily as a drop-in upgrade for many existing active setups and includes all required pots and wiring.
How do they handle voice switching?
I have a emg 57/66tw guitar. The vol and tone are both push/pull so I can independently select one of the two voices.
If I just unplugged and swapped the pickups with the MortalCoil, what would happen?
Rex_Rocker
Well-known member
If they work with Fishman wiring, then they won't work with the dual-mode EMG's wiring.
I found the wiring diagram. If the plugs to the pickups are the same, getting three voices from two push/pull pots should be easy. Might require some slight modifications to the push pull terminal wiring.
But there IS a way to do it. I'm intrigued. High gain metal, JB, and single coil.
Artie
Peaveyologist
Or a 4PDT toggle is you want both to do V1, V2, and V3 simultaneously. (An S1 switch would do the same.)
Yeah, I was just going by what all the demo guitars at NAMM had. I suppose you could set it up with all kinds of different setups, really. But yeah, those demo guitars all had 2 push/pulls.
Hate to necro this but it seemed relevant and better than yet another thread for the same topic.
I was considering buying this set for a Kramer Vanguard (Charlie Parra) with an EMG 57/66 set as the 57 in there is SUPER NOISY... I'm assuming if I want to get the all the voices I can just drill a hole and put a mini toggle in there for it.. It just has a single volume and 3 way toggle on the pick guard and there's a ton of room to add a mini toggle for voice switching. Not really interested in adding tone control i'd just leave it cranked anyway..
I was considering buying this set for a Kramer Vanguard (Charlie Parra) with an EMG 57/66 set as the 57 in there is SUPER NOISY... I'm assuming if I want to get the all the voices I can just drill a hole and put a mini toggle in there for it.. It just has a single volume and 3 way toggle on the pick guard and there's a ton of room to add a mini toggle for voice switching. Not really interested in adding tone control i'd just leave it cranked anyway..
Similar threads
