Neck PUP to match Bridge Custom Custom in Berlin Pro?

[mike.g.smith]

I've currently replaced the bridge Kent Armstrong PAF in my Patrick Eggle Berlin Pro with a SH-11 Custom Custom to warm up the sound, as the guitar is naturally very bright (Mahogany body with maple cap and ebony f/board).

Can anyone recommend a similair swap for the neck position especially in terms of output level - I'm thinking Alnico Pro II or Pearly Gates as they are the same magnet (or possibly a '59 but I think this will be too similair to the stock Kent Armstrong PAF)?

 

[Lewguitar]

Re: Neck PUP to match Bridge Custom Custom in Berlin Pro?

I've currently replaced the bridge Kent Armstrong PAF in my Patrick Eggle Berlin Pro with a SH-11 Custom Custom to warm up the sound, as the guitar is naturally very bright (Mahogany body with maple cap and ebony f/board).

Can anyone recommend a similair swap for the neck position especially in terms of output level - I'm thinking Alnico Pro II or Pearly Gates as they are the same magnet (or possibly a '59 but I think this will be too similair to the stock Kent Armstrong PAF)?

I'd go alnico 2: Seth Lover N, Pearly Gates N or AIIPro N.

I use the Seth in my Hamer Monoco and the PGn in my Strat.

Lew