Neck single for HSS OPINIONS WANTED

J

JBViking

New member
Hey guys! I bought a used HSS guitar that has a DiMarzio Evolution in the bridge and 2 Fender true singles in neck and middle. I don’t know what kind of Fender pups these are but there isn’t a huge volume drop between those and the Evo. However, they are noisy. I want to replace them with something that will keep up with the Evo but still sound as creamy in the neck position.

Any suggestions?

Thanks!!!
 
Re: Neck single for HSS OPINIONS WANTED

DiMarzio Injector series, Satch Track neck, Cruiser Bridge (in the neck) or something like a Duncan Quarter Pounder would be my recommendations
 
Re: Neck single for HSS OPINIONS WANTED

is the custom stack + thicker than a cool rails? i havent tried them both in the same guitar to know. you using 500k pots?
 
Re: Neck single for HSS OPINIONS WANTED

It is! The Cool Rails, to me, is really scooped and open, and not thick at all.
 
Re: Neck single for HSS OPINIONS WANTED

Cool-rails can generate good output in the neck position when close to the strings. CR neck is at least a match for the output of the Satch Track. I use CR neck with a Fred bridge humbucker. The output levels balance pretty well an its a good compliment in tone. However with Evo bridge you will have some step in output.

I'm assuming your guitar will have 500k volume and 500k Tone, which is what I used with the CR neck and Fred bridge combination.
 
Last edited:
You must log in or register to reply here.
Back
Top