Need a wiring diagram please

[markster65]

I need a wiring diagram for 2-humbuckers (braided wire), 2-volumes, 1-tone, and a 3-way blade switch.

Any help would be appreciated

 

[ehdwuld]

2 Humbuckers/3-Way Lever Switch/2 Volumes/1 Tone

Basic guitar wiring diagram with 2 humbuckers, 3-way lever switch, two volumes and one tone control. <strong>Click diagram image to open/view full size version.</strong> </strong> Ready to get started? Don't forget the <a...

guitarelectronics.com

Dang the SD tool is so broken

 

[markster65]

Thanks for the diagram.

I'm doing some fret work and installing a kill switch on my buddies guitar. When I popped the control cover off, the wiring seemed odd.
Here's his current wiring. Does this look normal?

It looks like I need to remove the A2 to B2 jumper on the 3 way and fix the tone pot connections.

 

[ehdwuld]

Nah that looks right

You have the neck volume to one common
The bridge to the other common

Jumpers in the right place for the pickups

Only question is the tone control connection at the bridge common means the neck has no tone unless bridge is selected

Also the bridge volume has no reference to ground

On the one I posted, the tone was connected at the output jack so it was global

A connection from volume 1 and volume 2 would correct the ground thing

Edit

Oh yeah that jumper on A2 and B2
Is redundant

 

[markster65]

Appreciate all your help!

I'm going to clean up the soldering, shielding, and rewire everything.

ehdwuld, this is based off your original diagram. Everything look ok?

 

[ehdwuld]

I think you are good

Just remember the ground connection that ties all three pots together

It can be a single wire that jumps from one to another or one from each pot to the output ground